Icy Box IB-DK2107M-C Handbuch Seite 9

Manual IB-DK2107M-C
Starting up
1. Connect the delivered USB Type-C cable to the USB Type-C host interface of the
™ ™
IB-DK2107M-C.
2. Connect the other USB Type-C plug to the supported host computer.
™
3. Connect your devices to the appropriate interfaces on the dock.
Note for an installed M.2 drive (optional)
The M.2 drive inside the IB-DK2107M-C can be connected to or disconnected from the
computer via USB cable without shutting down the computer.
A new SSD must first be initialized, partitioned and formatted by the operation system to be
displayed by the system.
If the drive isn't recognized instantly by the operating system please check:
- if the driver software is installed (USB),
- if the SSD is initialized, partitioned and formatted.