Werbung
Safety Preauctions and important Informations!
To ensure safety at all times, and get the full performance spectrum of the product:
Please read the safety instructions carefully.
Operating:
1. Plug in the unit and turn POWER switch to On.
2. Select the desire temperature through the temperature dial knob by turn the knob clock
wise or anti-clockwise. You can set your desire temperature setting
between 5°C (40°F) ~ 30°C (85°F).
3. Plug your appliance into the female plug at the front side. eg. portable heater,
portable A/C etc.
4. If the setting is set for Heat, the LED light will turn Green to call for heat during room
temperature below desire temperature setting. When the room temperature reached the
set desire temperature. The Heater will turn off and LED light will turn Red.
5. If the setting is set for Cool, the LED light will turn Green to call for A/C during room
temperature above the desire temperature setting. When the room temperature reached
the set desire temperature. The A/C will turn off and LED light will turn Red.
Setting:
1 Unplug the unit and turn to the back side of the unit. There is a compartment door on the
top right hand side. Take off the compartment door. There is a switch to set between Heat
or Cool. The default setting at the factory is Heat.
2. After selecting the Heat/Cool switch. Close the compartment door tightly for
safety concern!
Technical Data:
1. Operating voltage: 230V AC/ 50Hz;
2. Load (Max): 16A 3680W – Resistive load; 9A@Cos =0.4 – Inductive load.
3. Operating Temperature: 5°C ~ 70°C.
4. Temperature Control range: 5°C (40°F) ~ 30°C (85°F);
Precision: ±1°C;
IMPORTANT SAFETY PRECAUTIONS:
Do not use an extension lead. Do not plug any device performing mechanical movement di-
rectly into the temperature controller.
Fan or other appliances with exposed elements should not be left unattended, and it is re-
commended that these types of appliances are not connected to the temperature controller.
Do not insert needles or any other metal objects into mains outlet. Avoid moisture, extreme
temperatures, shock and vibration. Used indoors only and do not be exposed in sunshine.
Recommended ambient temperature is 10ºC to 40ºC Do not open the temperature controller.
Repaired must be performed by authorized service personnel only. To clean casing and dis-
play use a soft cloth. Do not use chemical or scouring agents. Do not submerge in water.
Keep device out of the reach of children.
Vervielfältigung nur mit Genehmigung durch ChiliTec GmbH, Lehre
Instruction Manual
- productsheet Page 3 /3 -
EAR (WEEE): DE25841852
LUCID VerpackG: DE5562476395648
GRS (UBA-Register) Nr.: 21003466
Stand: 11/2019 - Ver. 1.00
Werbung
