Manipulation With The Cooler; Cleaning And Maintenance - Oprema OKSI Gebrauchsanweisung

MANIPULATION WITH THE COOLER

1. Open the main valve on the CO
2. Control the fall of CO
manometer, change the bottle
3. During the CO
connectors.
4. Close the CO
5. Choose the regime of work Summer- winter, on the switch button, (for the
coolers which have that option). In the summer mode the cooler creates the ice
bank which assures the bigger dispensing power of cooler to pour the beer
under 5 °C cold. In the winter mode of work, the water bath temperature is
controlled and adjustable by the thermostat and no ice bank. Some coolers
have mounted thermostat which operates in modus cold water-ice. You can
adjust button in level 1-7 and choose working modus.
WARNING
The cooler is equipped with automatic control of the ice bank and should
not be unplugged from the el. grid while the restaurant is closed. By
water-cooled cooler, it should always have the water valve open to
achieve desired quantity of water.

CLEANING AND MAINTENANCE

1. Daily works
Ordinary cleaning of taps and towers
2. Monthly works
Once a month change the water from water bath. Clean the cooler from outside,
especially taking care on the condenser unit cleaning with brush. The dirty
condenser causes a lower cooling efficiency of the cooler.
WARNING
When cleaning the cooler unplug it from the electric grid.
18
2
pressure on the bottle and when is shown the red area on
2
bottle changing, wash simultaneously the keg head and
2
valve when not using the cooler.
2
UPUTSTVO ZA RAD
USER INSTRUCTIONS
GEBRAUCHSANWEISUNG
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
И СОДЕРЖАНИЮ
bottle.