USER INSTRUCTIONS
User instruction consists of installation and usage instructions. This instruction is an
integral part of every cooler unit and it should allways be with the cooler and also during
every displacement or installation so that techical personnel could use it. Before
installation and usage of cooler, you should carefully read this user instruction in which
there are important informations for correct and safe use.
COOLER LABEL AND FEATURES
Every unit has its own identification number/code. This number is placed on the label
"Technical identifications". Label with technical information is the only way to identify the
cooler; on it there are useful informations about unit necessary for constructor /
maintenance, for fast and easy identification.
TRANSPORT AND STORAGE
To awoid damage of cooler, it is important to handle carefully during loading and
unloading.
Crane can be used for displacement of coolers when they are put on pallets.
do not turn the cooler
-
do not shake the cooler or package
-
Cooler must be stored in convenient and clean environment where temperature is
beetwen 0-40°C, and there should be no water or products remains.
Coolers can't be placed one on another, and allways must be in vertical position like it's
shown on packing.
PACKAGE DISPOSAL
When cooler is unpacked, it has to be checked if is it in correct condition. If there is any
doubt about environment protection inside of package, no installation or usage should be
made. Package must be destroyed or removed according to the law regulations.
PROCEDURE IN CASE OF IRREGULARITY
Most of technical problems can be easily solved with simple interventions. For that
purpose we ask you to carrefully read this user instruction before you call maintenance
service or producer. In case of impossibility to solve problem using this instruction, contact
the company from which you have bought the cooler.
14
UPUTSTVO ZA RAD
USER INSTRUCTIONS
GEBRAUCHSANWEISUNG
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
И СОДЕРЖАНИЮ