Suaoki D40 Bedienungsanleitung Seite 6

Equipment Operation
Power on and off
Long press
Long press
The laser will be switched off automatically after 30 seconds,the
equipment will power off after 3 minutes of inactivity.
Measurement Reference Point
Press button
Unit Conversion
Long press
Measurement
Single Distance Measurement
Press to activate the laser. Press
distance measurement. The result will be displayed on the screen
immediately.
button to power on the equipment.
button to switch off the equipment.
to change the reference point(front & rear)
button to switch the unit.
· 4 ·
again to trigger the
EN