Power Supply Batteries (Battery Powered Versions); Batteries: Preparation; Batteries: Installation And Connection - VLX 416S Bedienungsanleitung

Make sure the mains system is suitably earthed and that sockets ensure the continuity of the earth con-
Failure to observe these instructions could cause possibly serious damage to people and things and

Power supply batteries (battery powered versions)

To avoid the risk of electrocution, batteries must be installed by the manufacturer or by personnel trained
seriously jeopardise manoeuvrability and lead to the brush motor overheating. Batteries with a lower
capacity and weight will require charging more frequently. Batteries must be kept charged, dry, clean
and with tight terminals.

Batteries: preparation

During installation of the batteries or any type of battery maintenance, the operator must be provided
with the necessary personal protection devices (gloves, goggles overalls, etc) to limit the risk of accident.
If the batteries are dry, proceed as follows before installing them in the machine.
Ambient temperature
°C
> + 35°C
from 0°C to + 35°C
from 0°C to - 20°C
< - 20°C

Batteries: installation and connection

Make sure you connect the terminals marked with a "+" to the positive poles of the battery. Do not check
Meticulously follow the instructions given below as short circuiting the batteries could cause them to
WARNING
ductors.
DANGER
invalidates the guarantee.
DANGER
and authorised by the manufacturer.
DANGER
Ambient temperature
°F
> + 95°F
from +32°F to + 95°F
from +32°F to - 4°F
< + 4°F
DANGER
the battery charge by sparking.
explode.
% Sulphuric acid
25%
30%
40%
45%
EN
% Distilled water
75%
70%
60%
55%
-
22