Basic Operation; Call Management - Kruger&Matz Traveler K20 Bedienungsanleitung

Owner's manual

BASIC OPERATION

Turn on/ off: Press and hold the MFB for about 3 seconds. A voice prompt
will be issued, LED indicator flashes blue once every 8 seconds.
The headset will automatically turn off if pairing is not completed within about
5 minutes.
Press and hold the MFB for about 4 seconds to turn off the headset. A voice
prompt will be issued, LED indicator flashes red two times, then goes off.
Mute microphone: Press the mute button once to mute. Press again to
unmute.
Factory settings: During charging, press and hold the MFB for about 4
seconds until LED indicator flashes blue.
EN

CALL MANAGEMENT

Answer call: When there is an incoming call, you will hear a voice prompt.
LED indicator flashes blue once every 4 seconds. Press the MFB to answer the
call. During call, LED indicator flashes twice every 10 seconds.
18