Werbung
2.2. Specification.
Parameter
Air flow, min
Air flow, max
Relief valve
Width
Height
Weight
3. Introduction. Setup. Air Requirements. Cleaning
3.1. Introduction.
CONTRACOR CK-50 Portable Moisture Separators are designed for removing water, oil and
dirt particles from compressed air supply. It is specially designed to work with portable air
compressors in the outdoor field for blast cleaning applications.
3.2. Setup.
Connect the CK-50 Portable Moisture Separator to the air supply between the compressor
and the CAF-3 air filter installed on the blast machine inlet.
For connection use Contracor air hose ID= 38 mm and appropriate hose couplings with
two part hose clamps.
The farther the CK-50 Portable Moisture Separator is from the compressor, the more mois-
ture will condense in the line, making it more likely to be removed.
The water and oil that collect at the bottom of the CK-50 Portable Moisture Separator must
be periodically be drained using the manual drain cook.
6
5 m3/min by 4 bar
22 m3/min by 10 bar
Мах. 10.5 bar
565 mm
960 mm
40 kg
Value
CONTRACOR
Version 1.0
®
Werbung
