Troubleshooting - Beko STM 4116 B Bedienungsanleitung

4 Troubleshooting

Problem
The steamer does not heat up
The steamer does not produce steam
Water spills from the water tank
The steamer is producing a loud humming
or pumping sound
The steamer does not seem to be
removing creases easily
Unsure when to use the brush
Avoiding discoloring of metal accessories
on the garment
Garment Steamer / User Manual
Possible solution
• Check main plug is inserted correctly.
• Check power supply.
• Check power button.
• Check the water level and the water tank
inlet cover is properly covered.
• Press the steam activation button harder.
• Hold the steamer in an upright position.
• Make sure water is not over the MAXI-
MUM level.
• Make sure water tank inlet cover is prop-
erly closed.
• Check water level; if there is no water or it
is low , refill the water tank.
• Hold the steamer in an upright position
and stretch the fabric downward to en-
sure best results.
• Use net brush on delicate fabrics and
fabric brush on other subjects for better
results.
• Do not directly hover the garment steam-
er over the metal accessories.
• Be cautious and steam around the metal
accessories.
17 / EN