Parrot DISCO Benutzerhandbuch Seite 23

VIA A MICRO USB FLASH DRIVE
1. Connect your micro USB flash drive (not provided) to a computer.
Make sure that your flash drive does not contain any files in .plf
format.
2. Go to the Parrot Disco's support page on www.parrot.com and
download the update file available in .plf format.
3. Copy this file to the root of your micro USB flash drive.
4. Turn on the Parrot Disco.
5. Connect the micro USB flash drive to one of the Parrot Disco's
ports.
> The Parrot Disco automatically restarts and the warning light
flashes yellow. Then, the Parrot Disco restarts again.
6. Wait until the Parrot Disco has completely restarted.
7. Disconnect the micro USB flash drive
> The update is complete.
WARNING LIGHT INDICATIONS
Flashing
red light
Flashing
green light
Flashing
yellow light
The Parrot Disco is starting up�
Or
The Parrot Disco has detected an error�
> Restart the Parrot Disco on a flat,
immobile surface, out of the wind. If the
problem persists, visit the Parrot Disco's
support page on www.parrot.com.
The Parrot Disco has detected the GPS signal
and is ready to take off�
The Parrot Disco update is underway�
Do not turn off the Parrot Disco�
23