Party Light & Sound PARTY-210LED Bedienungsanleitung Seite 4

DESCRIPTION OF THE REMOTE CONTROL
1. STANDBY: Switches the unit into standby mode.
2. Input Mode Button: Toggle between USB,TF, LINE, BT
3. Mute: Mute the sound
4. PLAY/PAUSE
5. : Select previous channel
6. : Select next channel.
7. EQ: Select EQ mode.
8. VOL-: Reduce the master volume
9. VOL+: Increase the master volume
10. REP: Repeat the playing track.
11. NO FUNCTION
12. Number keys for direct selection of a track on the USB flash drive or TF
card.
USE OF THE REMOTE CONTROL
Please operate the remote control within a distance of 2m and 30° between the remote and the appliance.
⠗
Aim the remote at the sensor. Remove all obstacles between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong sunshine.
⠗
If the remote control doesn't work properly, please check the batteries.
⠗
BATTERIES OF THE REMOTE
A Push the tab on the battery compartment in the direction of the arrow.
B Slide out the battery compartment to remove the battery
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but depo-
sited in separate collection points for recycling.
CAUTION!
Do not swallow the battery. Danger of chemical burns.
The supplied remote control contains a button cell. In case of ingestion, it might cause serious internal burns
within only 2 hours that might lead to death.
Keep new and old batteries out of the reach of children.
If the battery compartment doesn't close properly, stop using the product and keep it out of the reach of
children.
If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body,
contact immediately a doctor.
CONNECTION OF A WIRED MICROPHONE (NOT INCLUDED)
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound output.
KARAOKE FUNCTION
This feature is available with any input. Play a track through AUX/USB/TF/ Bluetooth, connect a microphone and
sing along.
BUILT-IN REC FUNCTION
1. Plug a microphone into the MIC IN input.
2. Insert a USB/TF card into the corresponding port. Press Input selector button and select USB/TF mode.
3. If the USB/TF card is plugged into the speaker for the first time, the system will automatically create a folder
named 'RECORD' to save the recorded files.
4
2
1
4
5
7
10
EN
3
6
8
9
11
12