Herunterladen Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
• Connection to AC 230Vac household power supply mains
- Connect the 230Vac cable to the coolbox lid
- Plug the power cable (fi g.2) into the alternating current socket
Caution!
Ensure you ALWAYS plug in the power cable from the correct side.
Caution!
For models where a dual power supply mode is provided: NEVER connect the 12 Vdc and the 230 Vac cables at the same
time.
4
USE
• For health-related reasons, always clean the appliance inside and outside with a wet cloth any time you use the coolbox.
• Always store previously cooled food and drinks in the coolbox.
• Let warm food cool down before storing them in the coolbox.
• Connect the device on a stable base.
• The coolbox must be opened as little as possible, and it must be reclosed in the shortest time so that a constant temperature
can be held inside.
• The special insulation allows food and drinks to remain fresh for a long time even when the coolbox is off. To maximize and
extend the cooling effect over time, we suggest you use the ice packs (see ACCESSORIES).
• Caution!
In cases when medications need to be cooled, please ensure the device has a cooling power rating that suits the
requirements of all medications (see table of performance).
• Caution!
The device is suitable to keep cool food and drinks in their original packaging.
Never use the product for more than 36 hours of continuous operation.
Prolonged and continuous use may reduce performance or even damage the cooling system.
Once the coolbox is off, wait at least 2 hours before turning it on again.
• Caution!
After a long period of operation, water may form and accumulate at the bottom of the coolbox. This is normal, as air
humidity condenses during the cooling process. This means the coolbox is not broken.
If necessary, remove excess humidity with a wet cloth.
• Caution!
The cooling is produced by a Peltier cooling system that does not contain CFC or coolants.
5
OPERATION
The coolbox performance values are listed in the tables referring to the various product types (see section: TESTS). In these
tables, each external temperature value matches an average internal temperature value. This data refers to an empty coolbox,
after 180 minutes of operation, and may vary above or below 1.5°C.
The lid hosts a display unit (A-B) and a keypad (C), to operate the electrical coolbox. The settings are:
POWER ON/ POWER OFF: hold the middle key pressed for at least two seconds.
INTERNAL TEMPERATURE SETTING:
1) Select the function by pressing the key
2) Set the temperature by suing
may be set – warm-up function - ).
3) Confi rm by pressing the middle key.
4) Set the scale in °C or °F degrees by means of the cursor keys
If indicator lamp
*For the CW version only, the lighting up of the

AUDIO SETTING:

1) Select the function by pressing the key
2) Set 01 to enable the audio function, 00 to inhibit the audio function.
3) Confi rm the entry by pressing the middle key.
8
2010-MANUALE_professional.indd 8
2010-MANUALE_professional.indd 8
.
(* In the Mr. Hyde version, a temperature even higher than room temperature
is on, the cooling mode is enabled
indicator lamp indicates the warming-up mode is enabled.
.
and confi rm by pressing the middle key.
22/12/2010 11.12.59
22/12/2010 11.12.59

Werbung

loading

Diese Anleitung auch für:

Professional 30Professional 40