Eldom droppy C245SB Handbuch Seite 9

INSTRUCTION MANUAL
EN
CORDLESS KETTLE C245SB/C245C
2
GENERAL DESCRIPTION
1. Spout + net filter
2. Handle
3. Opening lid
3
4. Water level indicator
1
5. On/off switch + control lamp
6. Rotating base
TECHNICAL DATA
4
- power: 2000 W
- mains voltage: 230V ~ 50Hz
5
- 1.7 litre capacity
6
OPERATION
Cordless kettle C245SB/C245SC is for boiling water. It is possible to boil 0.5 – 1.7 litre of
water in the kettle.
The kettle base (6) must be put on a flat and dry surface.
In the base there is some space for an excess cord. It is important for the cord to be led from
the base (6) through a special groove so that the appliance could be stable.
Before using the kettle for the first time fill it up (2-3 times) with water, boil the water and
then empty the kettle.
The kettle can be filled with water directly through the spout (1) or after opening
the lid (3).
The kettle must not be filled up when on the base.
The kettle starts working after putting the switch (5).
The kettle working is signalled by the control lamp (5).
The kettle switches off automatically after the water has boiled.
You can stop heating water at any time by putting the switch (5).
EN|9