Kasanova YUY000016 Bedienungsanleitung Seite 14

14
CHOPPER
CLEANING
Clean the appliance before using for the first time!
DANGER! Remove the power plug 6 from the socket before cleaning
the socket before cleaning the multi chopper.
Do not immerse the power base 5, the mains cable or the power plug 6
in water or any other liquid.
When washing in the sink, the water should be clear enough for the
blade unit 3 to still be visible.
WARNING! Do not use any astriongent or abrasive cleaning agents.
If necessary, wipe the power base 5 and the mains cable 6 with a slightly
damp cloth. Make sure that the power base 5 is fully dry before using it
again. All accessories, with the exception of the power base 5, can be
cleaned by hand or in the top rack of the dish-washer.
Leave all parts to dry completely before you tidy them away.
A few tips on cleaning:
Clean the appliance as soon as possible after use so that food residue
does not dry on. Whenever processing very salty foods, wash the blade
unit 2 at once.
ASSEMBLY
DANGER! Only plug the power plug 6 into socket when the
multichopper is fully assembled and filled.
• Place the container on the power base. Twist the container
anticlockwise.
• Now insert the blade unit as required into the container. Use the
blade unit to chop harder foodstuffs for example, dips and sauces.
• To remove, twist the container clockwise and lift it off the power
base.