Inventum HNK147 Gebrauchsanleitung Seite 12

interfere with the function of a pacemaker. However, they are still well
within the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please consult your doctor and the manufacturer of your pacemaker
before using this heating pad.
• Do not pull, twist or make sharp bends in the cables.
• Please check this heating pad frequently for signs of wear and tear
or damage. If any such signs are evident, if the heating pad has been
used incorrectly or if it no longer heats up, it must be checked by the
manufacturer before being switched on again.
• If the mains connection cable of the heating pad is damaged, it must
be replaced by the manufacturer, its service agent or similar qualified
persons to avoid any risk.
• While this heating pad is switched on, the following conditions must be
observed:
– objects must not be placed on the pad (e.g. suitcase or washing
basket)
– heat sources, such as hot water bottles, heating pads or similiar,
must not be placed on the pad.
• The electronic components in the controller warm up when the
heating pad is in use. For this reason, the controller must never be
covered or placed on the heating pad when it is in use.
• If you should have any questions about using our devices, please
contact Customer Services.
• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
12
• English