Optional Accessories - L1 Berner BCLL BASIC 183845 Bedienungsanleitung

E N G L I S H
• If the detector still does not turn on, take the detector to a Berner
service center.
THE DETECTOR'S SPEAKER MAKES NO SOUND.
• Ensure that the detector is on.
• Press the volume button. It will toggle on and off.
• Ensure that the laser is turned on and that it is emitting a laser beam.
• If the detector is still not making any sound, take it to a Berner service
center.
THE DETECTOR DOES NOT RESPOND TO THE BEAM FROM ANOTHER LASER UNIT.
• The Berner Digital Laser Detector has been designed to work only with
the BCLL BASIC and the BCLL TOP and certain other compatible line
lasers.
THE DETECTOR GIVES OFF A TONE BUT THE LCD DISPLAY WINDOW DOES NOT
FUNCTION.
• If the detector is very cold, allow it to warm up in a heated area.
• If the LCD display window is still not functioning, take the detector to a
Berner service center.
BRIGHT LIGHT SHINING ON DETECTOR CAUSES CONTINUOUS "ON-GRADE" SIGNAL.
• In the presence of very intense ambient light, the detector may give a
false or erratic indication of level.
• Reposition the detector out of the intense light or shade the sensor
window (25) to resume normal operation.

Optional Accessories

USING THE LASER WITH ACCESSORIES (FIG. 1 INSET)
The laser is equipped with a 1/4" x 20 female thread (11) on the bottom
of the unit. This thread is to accommodate current or future Berner
accessories. Only use Berner accessories specified for use with this
product. Follow the directions included with the accessory.
Consult your Berner Partner for further information on the appropriate
accessories.
62