Operation; Height Adjustment - Gemini UMX-3 Bedienungsanleitung

I n t r o d u c t i o n I n t r o d u c t i o n I n t r o d u c t i o n
I n t r o d u c t i o n I n t r o d u c t i o n
Congratulations on purchasing the Gemini UMX-3 VCA mixer. This state
of the art mixer is backed by a three year warranty, excluding crossfader
and channel slides. Prior to use, we suggest that you carefully read all the
instructions.
With VCA technology, audio is processed in a voltage-controlled amplifier
(VCA) removing it from the crossfader and channel slides giving them
extended life and reducing travel noise. The crossfader and channel slides
regulate the DC voltage that controls the VCA circuit. Additional
advantages of VCA technology include the ability to provide precise curve
adjustments for the crossfader and channel slides without sacrificing audio
quality. For additional information, refer to the diagrams on Page 3 for
crossfader adjustment and channel slide curve.
Features Features Features Features Features
• 2 Stereo Channels
• 3 Phono/Line Convertible, 1 Line, and 1 Mic Input
• Adjustable Input Assign Switches
• Channel Slide Curve Control
• Crossfader with Curve Control
• State of the Art Cue Section with Split
• Crossfader Reverse (Hamster) Switch
• Balanced and Unbalanced Master Outputs
• Zone and Record outputs
• Dual mode display
Cautions Cautions Cautions Cautions Cautions
1 . All operating instructions should be read before using this equipment.
2 . To reduce the risk of electrical shock, do not open the unit. There are
NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a
qualified service technician.
In the U.S.A., if you have any problems with this unit, call In the U.S.A., if you have any problems with this unit, call In the U.S.A., if you have any problems with this unit, call In the U.S.A., if you have any problems with this unit, call In the U.S.A., if you have any problems with this unit, call
1-732-738-9003 1-732-969-9000 for customer service. Do not return equipment 1-732-969-9000 for customer service. Do not return equipment
1-732-969-9000 for customer service. Do not return equipment 1-732-969-9000 for customer service. Do not return equipment 1-732-969-9000 for customer service. Do not return equipment
to your dealer. to your dealer. to your dealer. to your dealer. to your dealer.
3 . Do not expose this unit to direct sunlight or to a heat source such as a
radiator or stove.
4 . This unit should be cleaned only with a damp cloth. Avoid solvents or
other cleaning detergents.
5 . When moving this equipment, it should be placed in its original carton
and packaging. This will reduce the risk of damage during transit.
6 . DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7 . DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY
CONTROLS OR SWITCHES.

Height Adjustment

Height Adjustment Height Adjustment Height Adjustment Height Adjustment
When using a UMX mixer with professional turntables, such as
the Gemini PT Series, you can make the mixer level with the
turntable by removing the mixer's feet.
1 . Place a small screw driver under the foot's center anchor.
2 . Gently pry the center anchor up and the foot will come off.
To replace the foot:
1 . Place the foot on the mixer without the center anchor.
2 . Replace the center anchor and push down on it to anchor
the foot to the mixer.
Connections Connections Connections
Connections Connections
1 . Make sure that the POWER (1) POWER (1) POWER (1) POWER (1) POWER (1) switch is in the off position. The
POWER LED (32) POWER LED (32)
POWER LED (32) POWER LED (32) will be off. This unit comes supplied with a 18 volt POWER LED (32)
AC adaptor. Plug the adaptor into the rear panel power jack. Then plug
the adaptor into a proper power source.
2 . The UMX-3 is supplied with 4 sets of output jacks. The BALANCED
MASTER OUTPUT (4) jacks are used to connect to your main MASTER OUTPUT (4) MASTER OUTPUT (4)
MASTER OUTPUT (4) MASTER OUTPUT (4)
amplifier using standard cables with 1/4" connectors. We recommend
using the balanced amp outputs if the cables to your amp are 10 feet or
more. BALANCED MASTER OUTPUTS BALANCED MASTER OUTPUTS BALANCED MASTER OUTPUTS have three separate BALANCED MASTER OUTPUTS BALANCED MASTER OUTPUTS
conductors, two of which are signal (positive and negative) and one
shield (ground). The balanced line uses a tip-ring-sleeve connection.
Tip = hot or positive (+), ring = cold or negative (-), and sleeve =
shield/ground. The MASTER OUTPUT (5)
used to connect to your main amplifier. The REC OUTPUT (7)
can be used to connect the mixer to the record input of your recorder
enabling you to record your mix. The ZONE OUTPUT (6)
you to hook up an additional amplifier.
3 . The MIC (3) MIC (3) input (found on the rear panel) OR MIC (3) MIC (3) MIC (3)
(found on the front panel) accepts a 1/4" connector and balanced and
unbalanced microphones.
4 . On the rear panel are 3 stereo PHONO/LINE (9, 12, 13)
stereo LINE (8) LINE (8) LINE (8) LINE (8) input. The PHONO/LINE LINE (8)
(9) (9)
set the (9) (9) (9) input to Phono or Line. The PHONO/LINE
enables you to set the (12)
SWITCH SWITCH (14) (14)
SWITCH (14) SWITCH SWITCH (14) enables you to set the (13) (14)
phono inputs will accept only turntables with a magnetic cartridge.
GROUND SCREWS (2) GROUND SCREWS (2)
GROUND SCREWS (2) GROUND SCREWS (2) GROUND SCREWS (2) for you to ground your turntables are located
on the rear panel. The stereo line inputs will accept any line level input
such as a CD player, a cassette player, etc.
5 . Headphones can be plugged into the front panel mounted PHONES
( 3 6 ) j a c k . ( 3 6 ) ( 3 6 )
( 3 6 ) ( 3 6 )

Operation

Operation Operation Operation Operation
1 . POWER ON: Once you have made all the equipment connections to
your mixer, press the POWER (1)
the POWER LED (32) POWER LED (32) POWER LED (32) will light. POWER LED (32) POWER LED (32)
2 . CHANNEL 1: The GAIN (21) GAIN (21) control allows you to individually adjust GAIN (21) GAIN (21) GAIN (21)
the gain of the channel. Switch # (24)
PHONO 1 (13) or the LINE 2/PHONO 2 (12) PHONO 1 (13) PHONO 1 (13) PHONO 1 (13) PHONO 1 (13)
SLIDE SLIDE (29) (29)
SLIDE SLIDE SLIDE (29) (29) (29) controls the input level of this channel.
3 . CHANNEL 2: The GAIN (23) GAIN (23) GAIN (23) control allows you to individually adjust GAIN (23) GAIN (23)
the gain of the channel. Switch # (26)
PHONO 3 (9) PHONO 3 (9) or the LINE 4 (8) PHONO 3 (9) PHONO 3 (9) PHONO 3 (9)
controls the input level of this channel.
4 . INPUT ASSIGN SWITCHES: You can adjust the position of the INPUT
ASSIGN (24, 26) switches to move left to right, up and down OR ASSIGN (24, 26) ASSIGN (24, 26) ASSIGN (24, 26) ASSIGN (24, 26)
45 degree angle. Make these adjustments with the power OFF.
1 ) Remove the channel slide, crossfader knobs and the 4 screws from
the sides of the lower face plate. Then remove the lower faceplate.
2 ) Remove the 2 screws in the corners of the assign switch plate.
Rotate the switch plate to the desired position, replace the screws
and tighten down.
3 ) To position the switch at a 45 degree angle, you need to reposition
the switch on the assign switch plate. First, remove the 2 screws in
the corners of the assign switch plate. Then, lift the switch plate up
and remove the 2 smaller screws next to the switch. Rotate the
switch plate to the right until the 45 degree holes align with the
switch holes, replace the screws and tighten down. Replace the
switch plate and tighten down.
P a g e 5
MASTER OUTPUT (5) MASTER OUTPUT (5) MASTER OUTPUT (5) MASTER OUTPUT (5) jacks are unbalanced and
REC OUTPUT (7) REC OUTPUT (7) REC OUTPUT (7) jacks
REC OUTPUT (7)
ZONE OUTPUT (6) ZONE OUTPUT (6)
ZONE OUTPUT (6) ZONE OUTPUT (6) jacks allow
OR OR OR the MIC (35) OR
PHONO/LINE (9, 12, 13) PHONO/LINE (9, 12, 13)
PHONO/LINE (9, 12, 13) inputs and 1 PHONO/LINE (9, 12, 13)
PHONO/LINE SWITCH PHONO/LINE PHONO/LINE PHONO/LINE SWITCH SWITCH (10) SWITCH SWITCH (10) (10) (10) enables you to (10)
PHONO/LINE PHONO/LINE
PHONO/LINE SWITCH PHONO/LINE
(12) (12) (12) input to Phono or Line. The PHONO/LINE (12)
(13) (13)
(13) input to Phono or Line. The (13)
POWER (1) POWER (1) switch. The power will turn on and POWER (1)
POWER (1)
(24) (24)
(24) (24) allows you to select the LINE 1/
LINE 2/PHONO 2 (12) LINE 2/PHONO 2 (12) LINE 2/PHONO 2 (12) input. The CHANNEL LINE 2/PHONO 2 (12)
(26) allows you to select the LINE 3/ (26) (26)
(26)
LINE 4 (8) LINE 4 (8) input. The CHANNEL LINE 4 (8) LINE 4 (8) CHANNEL CHANNEL CHANNEL CHANNEL SLIDE
BALANCED BALANCED BALANCED BALANCED
MIC (35) input MIC (35) MIC (35) MIC (35)
SWITCH SWITCH (11) (11)
SWITCH (11) SWITCH (11) (11)
PHONO/LINE PHONO/LINE PHONO/LINE PHONO/LINE
PHONES PHONES PHONES PHONES
LINE 1/ LINE 1/
LINE 1/ LINE 1/
CHANNEL CHANNEL CHANNEL CHANNEL
LINE 3/ LINE 3/ LINE 3/
LINE 3/
SLIDE SLIDE SLIDE (30) SLIDE (30) (30) (30) (30)
INPUT INPUT
INPUT INPUT
OR OR OR OR at a