Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Version 1.0
Published January 2016
Copyright©2016 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK B150M-PIO

  • Seite 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Seite 2 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
  • Seite 3: Motherboard-Layout

    B150M-PIO Motherboard Layout CPU_FAN1 CHA_FAN1 PCIE1 ATX12V1 Front USB 3.0 RoHS USB 3.0 CMOS T: USB1 Battery B: USB2 USB 2.0 Top: T: USB0 RJ-45 B: USB1 CLRMOS1 PCI Express 3.0 USB3_3_4 Intel USB_2_3 B150 HD_AUDIO1 PANEL1 SPK_CI1 PLED PWRBTN...
  • Seite 4 No. Description ATX 12V Power Connector (ATX12V1) CPU Fan Connector (CPU_FAN1) Chassis Fan Connector (CHA_FAN1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) ATX Power Connector (ATXPWR1) SATA3 Connector (SATA3_2) SATA3 Connector (SATA3_1) System Panel Header (PANEL1) Chassis Intrusion and Speaker Header (SPK_CI1) TPM Header (TPMS1) USB 3.0 Header (USB3_3_4) USB 2.0 Header (USB_2_3)
  • Seite 5 B150M-PIO I/O Panel No. Description No. Description PS/2 Mouse Port USB 2.0 Ports (USB01)*** LAN RJ-45 Port* USB 3.0 Ports (USB3_12) Line In (Light Blue)** DVI-D Port Front Speaker (Lime)** PS/2 Keyboard Port Microphone (Pink)** * There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
  • Seite 6 ** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi- channel audio feature through the audio driver. Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager. Function of the Audio Ports in 7.1-channel Configuration: Port Function...
  • Seite 7: Chapter 1 Introduction

    ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Seite 8: Specifications

    1.2 Specifications • uDTX Form Factor supports PIO and Micro ATX Platform • Solid Capacitor design • Supports 6 Generation Intel® Core i7/i5/i3/Pentium®/ Celeron® Processors (Socket 1151) • Supports CPU up to 95W • Digi Power design • 5 Power Phase design • Supports Intel®...
  • Seite 9 Rear Panel • 1 x PS/2 Keyboard Port • 1 x DVI-D Port • 2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full Spike Protection))* * ACPI wake-up function is supported on USB01 ports only. • 2 x USB 3.0 Ports (Supports ESD Protection (ASRock Full Spike Protection)) • 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED...
  • Seite 10 * To install Windows® 7 OS, a modified installation disk with xHCI drivers packed into the ISO file is required. Please refer to page 114 for more detailed instructions. * For the updated Windows® 10 driver, please visit ASRock’s website for details: http://www.asrock.com • FCC, CE, WHQL Certifica- • ErP/EuP Ready (ErP/EuP ready power supply is required)
  • Seite 11 B150M-PIO * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system.
  • Seite 12 1.3 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Seite 13 B150M-PIO Chassis Intrusion and Please connect the SPEAKER DUMMY Speaker Header chassis intrusion and the DUMMY (7-pin SPK_CI1) chassis speaker to this (see p.1, No. 9) header. SIGNAL DUMMY Serial ATA3 Connectors These two SATA3 (SATA3_1: connectors support SATA see p.1, No. 7)
  • Seite 14 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC’97 audio panel, please install it to the front panel audio header by the steps below: A.
  • Seite 15 B150M-PIO TPM Header This connector supports Trusted (17-pin TPMS1) Platform Module (TPM) system, (see p.1, No. 10) which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.
  • Seite 16 1 Einleitung Vielen Dank, dass Sie sich für das B150M-PIO von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Seite 17: Technische Daten

    B150M-PIO 1.2 Technische Daten • uDTX-Formfaktor unterstützt PIO und Micro ATX Plattform • Feststoffkondensator-Design • Unterstützt die Prozessoren Intel® Core Prozessor i7/i5/i3/Pentium®/ Celeron® der 6. Generation (Sockel 1151) • Unterstützt CPU bis 95W • Digi Power design • 5-Leistungsphasendesign • Unterstützt Intel® Turbo Boost 2.0-Technologie • Intel®...
  • Seite 18 • 7.1-Kanal-HD-Audio (Realtek ALC887-Audiocodec) Audio * Zur Konfiguration von 7.1-Kanal-HD-Audio müssen Sie ein HD-Frontblenden-Audiomodul nutzen und den Mehrkanalton über den Audiotreiber aktivieren. • Unterstützt Überspannungsschutz (ASRock Full Spike Protection) • ELNA-Audiokondensatoren • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111GR • Unterstützt Wake-On-WAN...
  • Seite 19 • 1 x 4-poliger 12-V-Netzanschluss • 1 x Audioanschluss an Frontblende • 1 x USB 2.0-Stiftleiste (unterstützt 2 USB 2.0-Ports) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x USB 3.0-Stiftleiste (unterstützt 2 USB 3.0-Ports) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • AMI-UEFI-Legal-BIOS mit Unterstützung...
  • Seite 20 Zertifi- • ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich) zierungen * Detaillierte Produktinformationen finden Sie auf unserer Webseite: http://www.asrock.com Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS- Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktungswerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden...
  • Seite 21: Integrierte Stiftleisten Und Anschlüsse

    B150M-PIO 1.3 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen. Systemblende-Stiftleiste Verbinden Sie Netzschalter,...
  • Seite 22 Gehäuseeingriffs- und Bitte verbinden Sie Gehäusee- SPEAKER DUMMY Lautsprecher-Stiftleiste ingriffsvorrichtung und den DUMMY (7-polig, SPK_CI1) Gehäuselautsprecher mit dieser (siehe S. 1, Nr. 9) Stiftleiste. SIGNAL DUMMY Serial-ATA-III-Anschlüsse Diese zwei SATA3-Anschlüsse (SATA3_1: nehmen SATA-Datenkabel zum siehe S. 1, Nr. 7) Anschluss interner Speichergeräte (SATA3_2: mit einer Datenübertragungsgesc siehe S.
  • Seite 23 B150M-PIO 1. High Definition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse muss dazu jedoch HDA unterstützt. Bitte befolgen Sie zum Installieren Ihres Systems die Anweisungen in unserer Anleitung und der Anleitung zum Gehäuse. 2. Bei Nutzung eines AC’97-Audiopanels dieses bitte anhand folgender Schritte an der Audiostiftleiste der Frontblende installieren: A.
  • Seite 24 ATX-12-V-Netzanschluss Dieses Motherboard bietet einen (4-polig, ATX12V1) 4-poligen ATX-12-V-Netzan- (siehe S. 1, Nr. 1) schluss. TPM-Stiftleiste Dieser Anschluss unterstützt das Trusted (17-polig, TPMS1) Platform Module- (TPM) System, das (siehe S. 1, Nr. 10) Schlüssel, digitale Zertifikate, Kennwörter und Daten sicher aufbewahren kann. Ein TPM-System hilft zudem bei der Stärkung der Netzwerksicherheit, schützt digitale Identitäten und gewährleistet die...
  • Seite 25: Contenu De L'emballage

    à modification sans préavis. En cas de modifications du présent document, la version mise à jour sera disponible sur le site Internet ASRock sans notification préalable. Si vous avez besoin d’une assistance technique pour votre carte mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous...
  • Seite 26: Spécifications

    1.2 Spécifications • Facteur de forme uDTX compatible PIO et Micro ATX Plateforme • Conception à condensateurs solides • Prend en charge les processeurs 6 Processeur génération Intel® Core i7/i5/i3/Pentium®/Celeron® (Socket 1151) • Supporte les processeurs jusqu’à 95W • Digi Power design • Alimentation à...
  • Seite 27 • Prend en charge la fonction Wake-On-LAN • Protection contre les orages/décharges électrostatiques (Pro- tection complète contre les pics ASRock) • Prend en charge la détection de câble LAN • Prend en charge la fonction d’ é conomie d’ é nergie Ethernet 802.3az...
  • Seite 28 • 1 x embase USB 2.0 (2 ports USB 2.0 pris en charge) (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock)) • 1 x embase USB 3.0 (2 ports USB 3.0 pris en charge) (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock))
  • Seite 29 • ErP/EuP Ready (alimentation ErP/EuP ready requise) tions * pour des informations détaillées de nos produits, veuillez visiter notre site : http://www.asrock.com Il est important de signaler que l’ o vercloking présente certains risques, incluant des modifications du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’...
  • Seite 30 1.3 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Seite 31 B150M-PIO SPEAKER Prise DEL d’alimentation Veuillez brancher DUMMY et emplacement sur châssis l'emplacement sur le châs- DUMMY (SPK_CI1 à 7 broches) sis et le haut-parleur du (voir p.1, No. 9) châssis sur ce connecteur. SIGNAL DUMMY Connecteurs Serial ATA3 Ces deux connecteurs...
  • Seite 32 1. L’ a udio haute définition prend en charge la technologie Jack Sensing (détection de la fiche), mais le panneau grillagé du châssis doit être compatible avec la HDA pour fonctionner correctement. Veuillez suivre les instructions figurant dans notre manuel et dans le manuel du châssis pour installer votre système.
  • Seite 33 B150M-PIO Connecteur d’alimentation Cette carte mère est ATX 12V dotée d’un connecteur (ATX12V1 à 4 broches) d’alimentation ATX 12V à (voir p.1, No. 1) 4 broches. Embase TPM Ce connecteur prend en charge un (TPMS1 à 17 broches) module TPM (Trusted Platform (voir p.1, No.
  • Seite 34: Contenuto Della Confezione

    Web per informazioni specifiche relative al modello attualmente in uso. È possibile trovare l'elenco di schede VGA più recenti e di supporto di CPU anche sul sito Web di ASRock. Sito Web di ASRock http://www.asrock.com.
  • Seite 35 B150M-PIO 1.2 Specifiche • Il fattore di forma uDTX supporta PIO e Micro ATX Piattaforma • Design condensatore solido • Supporta processori 6 Generation Intel® Core i7/i5/i3/ Pentium®/Celeron® (Socket 1151) • Supporta CPU fino a 95 W • Digi Power design • Potenza a 5 fasi...
  • Seite 36 • Realtek RTL8111GR • Supporta Wake-On-WAN • Supporta Wake-On-LAN • Supporto la protezione da fulmini/scariche elettrostatiche (ESD) (protezione completa ASRock dai picchi di corrente) • Supporta il rilevamento cavo LAN • Supporta Energy Efficient Ethernet 802.3az • Supporta PXE • 1 x porta mouse PS/2 I/O pannello • 1 x porta tastiera PS/2...
  • Seite 37 * Per installare Windows® 7, è necessario un disco di installazione modificato con i driver xHCI integrati nel file ISO. Fare riferimento a pagina 114 per altre istruzioni dettagliate. * Per il driver aggiornato di Windows® 10, visitare il sito ASRock all’indirizzo: http://www.asrock.com • FCC, CE, WHQL Certificazioni • ErP/EuP Ready (è...
  • Seite 38 * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web: http://www.asrock.com Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazione delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclocking o l'utilizzo di strumenti di overclocking di terze parti. L'overclocking può...
  • Seite 39 B150M-PIO 1.3 Header e connettori sulla scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà danni permanenti alla scheda madre.
  • Seite 40 Collegamento altoparlante e Collegare l’intrusione SPEAKER DUMMY intrusione telaio telaio e l’altoparlante a DUMMY (SPK_CI1 a 7 pin) questo collegamento. (vedere pag. 1, n. 9) SIGNAL DUMMY Connettori Serial ATA3 Questi due connettori (SATA3_1: SATA3 supportano i cavi vedere pag. 1, n. 7) dati SATA per dispositivi (SATA3_2: di archiviazione interna,...
  • Seite 41 B150M-PIO 1. L'audio ad alta definizione supporta le funzioni Jack sensing, ma il filo del pannello sullo chassis deve supportare HDA per funzionare correttamente. Seguire le istruzioni presenti nel nostro manuale e nel manuale dello chassis per installare il sistema.
  • Seite 42 Connettore di alimentazione Questa scheda madre è ATX da 12 V dotata di un connettore (ATX12V1 a 4 pin) di alimentazione ATX da (vedere pag. 1, n. 1) 12 V a 4 pin. Header TPM Questo connettore supporta il (TPMS1 a 17 pin) sistema Trusted Platform Mod- (vedere pag.
  • Seite 43: Contenido Del Paquete

    Podrá encontrar las últimas tarjetas VGA, así como la lista de compatibilidad de la CPU, en el sitio web de ASRock. Sitio web de ASRock http://www.asrock.com.
  • Seite 44: Especificaciones

    1.2 Especificaciones • Factor de forma uDTX que admite PIO y Micro ATX Plataforma • Diseño de condensador sólido • Admite la familia de procesadores Intel® Core i7/i5/i3/ Pentium®/Celeron® (zócalo 1151) de la 6ª generación • Compatible con CPU de hasta 95W • Digi Power design • Diseño de 5 fases de alimentación • Compatible con la tecnología de Intel®...
  • Seite 45 I/O • 1 puerto DVI-D • 2 puertos USB 2.0 (compatible con protección contra electricidad estática (protección ASRock Full Spike))* * La función de reactivación ACPI solo se admite en puertos USB01. • 2 puertos USB 3.0 (compatible con protección contra electricidad estática (protección ASRock Full Spike))
  • Seite 46 ISO. Consulte la página 114 para obtener información más detallada. * Para obtener el controlador actualizado para Windows® 10, visite el sitio Web desde ASRock para obtener detalles: http://www.asrock.com...
  • Seite 47 ErP/EuP) * Para obtener más información acerca del producto, visite nuestro sitio web: http://www.asrock.com Tenga en cuenta que existen ciertos riesgos relacionados con el overclocking (sobreacel- eración), incluyendo el ajuste de la configuración del BIOS, aplicando la Tecnología overcloking no vinculada o utilizando las herramientas de overclocking de tercera parte.
  • Seite 48 1.3 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente so- bre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base. Cabezal del panel del Conecte el interruptor de PLED+...
  • Seite 49 B150M-PIO Cabezal de intrusión de Conecte la intrusión de SPEAKER DUMMY chasis y de altavoces chasis y el altavoz del DUMMY (SPK_CI1 de 7 contactos) chasis a este cabezal. (consulte la pág.1, N.º 9) SIGNAL DUMMY Conectores Serie ATA3 Estos dos conectores...
  • Seite 50 1. El Audio de Alta Definición (HDA, en inglés) es compatible con el método de sensor de conectores, sin embargo, el cable del panel del chasis deberá ser compatible con HDA para que pueda funcionar correctamente. Siga las instrucciones que se indican en nuestro manual y en el manual del chasis para instalar su sistema.
  • Seite 51 B150M-PIO Cabezal TPM Este conector es compatible con el (TPMS1 de 17 pines) sistema Módulo de Plataforma Se- (consulte la pág.1, N.º 10) gura (TPM, en inglés), que puede almacenar de forma segura claves, certificados digitales, contraseñas y datos. Un sistema TPM también...
  • Seite 52: Комплект Поставки

    1 Введение Благодарим вас за приобретение надежной материнской платы ASRock B150M- PIO, выпускаемой под постоянным строгим контролем компании ASRock. Эта материнская плата обеспечивает великолепную производительность и характеризуется прочной конструкцией в соответствии с требованиями компании ASRock в отношении качества и долговечности.
  • Seite 53 B150M-PIO 1.2 Спецификация • Форм-фактор uDTX совместим с PIO и Micro ATX Платформа • Схема на основе твердотельных конденсаторов го • Поддержка процессоров 6- Процессор поколения Intel® Core i7/i5/i3/Pentium®/Celeron® (Socket 1151) • Поддержка процессоров мощностью до 95 Вт • Digi Power design • Система...
  • Seite 54 * Для настройки 7.1-канального звук высокой четкости HD Audio используйте переднюю аудиопанель HD и активируйте функцию многоканального звука в аудиодрайвере. • Защита от перенапряжения (ASRock Full Spike Pro- tection) • Конденсаторы для аудиосистем ELNA • PCIE x1 Gigabit LAN 10/100/1000 Мб/с...
  • Seite 55 • 1 x аудиоразъем на передней панели • 1 x Колодка USB 2.0 (до 2 портов USB 2.0) с защитой от электростатического напряжения (ASRock Full Spike Protection) • 1 x Колодка USB 3.0 (до 2 портов USB 3.0) с защитой...
  • Seite 56 измененный установочный диск с драйверами xHCI, упакованными в файл ISO. Более подробные инструкции представлены на стр. 114. * Подробные сведения об обновлении драйвера Windows® 10 представлены на веб-сайте ASRock: http://www.asrock.com • FCC, CE, WHQL Сертификация • Совместимость с ErP/EuP (необходим блок питания, соответствующий...
  • Seite 57 B150M-PIO 1.3 Колодки и разъемы, расположенные на материнской плате Расположенные на материнской плате колодки и разъемы перемычками НЕ являются. НЕ устанавливайте на эти колодки и разъемы колпачковые перемычки. Установка колпачковых перемычек на эти колодки и разъемы может вызвать неустранимое повреждение материнской платы.
  • Seite 58 Колодка с разъемами Предназначена для SPEAKER DUMMY датчика вскрытия корпуса подключения датчика DUMMY и динамика вскрытия корпуса и (7-контактный SPK_CI1) корпусного динамика. (См. стр. 1, № 9) SIGNAL DUMMY Разъемы Serial ATA3 Эти два разъемов SATA3 (SATA3_1: предназначены для См. стр. 1, № 7) подключения...
  • Seite 59 B150M-PIO 1. Аудиосистема высокого разрешения поддерживает функцию распознавания разъема, но для е правильной работы необходимо, чтобы провод панели корпуса поддерживал передачу сигналов HDA. Инструкции по установке системы см. в этом руководстве и руководстве на корпус. 2. При использовании аудиопанели AC’97 подключите ее к аудиоколодке передней...
  • Seite 60 Разъем питания АТХ 12 В Эта материнская плата (4-контактный, ATX12V1) снабжена 4-контактным (См. стр. 1, № 1) разъемом питания АТХ 12 В. Колодка ТРМ Этот разъем обеспечивает (17-контактная, TPMS1) поддержку системы Trusted Platform (См. стр. 1, № 10) Module (TPM), которая способна обеспечить...
  • Seite 61: Conteúdo Da Embalagem

    ASRock sem aviso prévio. Se precisar de assistência técnica relacionada a esta placa principal, visite o nosso site para obter informações específicas sobre o modelo que estiver utilizando.
  • Seite 62 1.2 Especificações • Formato uDTX suporta PIO e Micro ATX Plataforma • Design de condensador sólido ª • Supports Processadores Intel® 6 Geração Core i7/i5/i3/ Pentium®/Celeron® (Soquete 1151) • Suporta CPU até 95W • Digi Power design • Design com 5 fases de alimentação • Suporta a tecnologia Intel®...
  • Seite 63 • Realtek RTL8111GR • Suporta Wake-On-WAN • Suporta Wake-On-LAN • Suporta Proteção contra Relâmpago/ESD (Proteção Total Con- tra Picos ASRock) • Suporta Detecção de Cabo LAN • Suporta Energy Efficient Ethernet 802.3az • Suporta PXE • 1 x Porta PS/2 para mouse E/S do • 1 x Porta PS/2 para teclado...
  • Seite 64 • 1 x conector de áudio do painel frontal • 1 x Plataforma USB 2.0 (Suporta 2 portas USB 2.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 1 x Plataforma USB 3.0 (Suporta 2 portas USB 3.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock))
  • Seite 65 B150M-PIO * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferramentas de overclocking de terceiros.
  • Seite 66 1.3 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores Colocar tampas de jumpers sobre os terminais e conec- tores irá causar danos permanentes à placa-mãe. Suporte do painel de Ligue o botão de PLED+ PLED-...
  • Seite 67 B150M-PIO Intrusão do Chassi e Conecte a instrusão do SPEAKER DUMMY Cabeçote de Autofalante chassi e autofalante do DUMMY (SPK_CI1 de 7 pinos) chassia este cabeçote. (ver p.1, N.º 9) SIGNAL DUMMY Conectores série ATA3 Estes duas conectores (SATA3_1: SATA3 suportam ver p.1, N.º...
  • Seite 68 1. O Áudio de alta definição suporta Sensor de Adaptador, mas o fio do painel no chassi deverá suportar HDA para funcionar corretamente. Por favor, siga as instruções no nosso manual e no manual do chassi para instalar o seu sistema. 2.
  • Seite 69 B150M-PIO Conector de alimentação Esta placa-mãe inclui um de 12V ATX conector de alimentação (ATX12V1 de 4 pinos) de 12V ATX de 4 pinos. (ver p.1, N.º 1) Suporte TPM Este conector suporta um sistema (TPMS1 de 17 pinos) com Módulo de Plataforma Con- (ver p.1, N.º...
  • Seite 70: Ambalaj İçeriği

    ASRock'ın web sitesinde yer alacaktır.. Bu anakart ile ilgili olarak teknik destek almak istiyorsanız, lütfen kullandığınız model hakkında özel bilgiler için web sitemizi ziyaret edin. En güncel VGA kartları ve CPU destek listelerini de ASRock'ın web sitesinden bulabilirsiniz. ASRock web sitesi http://www.asrock.com.
  • Seite 71 B150M-PIO 1.2 Özellikler • uDTX Form Faktörü PIO ve Mikro ATX destekler Platform • Yekpare Kapasitör tasarımı • 6. Nesil Intel® Core i7/i5/i3/Pentium®/Celeron® İşlemcileri destekler (Yuva 1151) • 95W’ye kadar CPU’yu destekler • Digi Power design • 5 Güç Safhası tasarımı...
  • Seite 72 * 7.1 CH HD Ses konfigürasyonu için bir HD ön panel ses modülü kullanılmalı ve çok kanallı ses özelliği ses sürücüsüsü ile etkinleştirilmelidir. • Dalgalanma Koruması Destekler (ASRock Tam Ani Gerilim Koruması) • ELNA Ses Kapakları • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111GR...
  • Seite 73 • 1 x Ön Panel Ses Bağlayıcısı • 1 x USB 2.0 Bağlantısı (2 USB 2.0 bağlantı noktası destek- ler) (ESD Koruması Destekler (ASRock Tam Ani Gerilim Koruması)) • 1 x USB 3.0 Bağlantısı (2 USB 3.0 bağlantı noktası destek- ler) (ESD Koruması...
  • Seite 74 * Detaylı ürün bilgisi için, lütfen web sitemizi ziyaret edin: http://www.asrock.com Lütfen, BIOS ayarlarını düzenleme, Bağımsız Hız Aşırtma Teknolojinin uygulanması ya da üçüncü kişilerin hız aşırtma araçlarının kullanılması da dahil olmak üzere tüm hız aşırtma işlemlerinin belirli bir risk taşıdığını unutmayın. Hız aşırtma, sisteminizin dayanıklılığını...
  • Seite 75 B150M-PIO 1.3 Ekli Bağlantılar ve Bağlayıcılar Ekli bağlantılar ve bağlayıcılar bağlantı teli değildir. Bağlantı teli kapaklarını bu bağlantı ve bağlayıcılar üzerine yerleştirmeyin. Bağlantı teli kapaklarının bağlantılar ile bağlayıcılar üzerine yerleştirilmesi, anakarta kalıcı hasar verebilir. Sistem Paneli Bağlantısı Güç anahtarını bağlayın,...
  • Seite 76 Kasa Yetkisiz Erişim ve Lütfen kasa yetkisiz erişim SPEAKER DUMMY Hoparlör Bağlantısı ve kasa hoparlörünü bu DUMMY (7 pimli SPK_CI1) bağlantıya takın. (bkz. sf.1, No. 9) SIGNAL DUMMY Seri ATA3 Bağlayıcıları Bu iki SATA3 bağlayıcısı, (SATA3_1: veri aktarım hızı 6,0 Gb/ bkz.
  • Seite 77 B150M-PIO 1. Yüksek Tanımlı Ses, Jak Algılama özelliğini destekler, ancak bu işlevin düzgün çalışabilmesi için kasa üzerindeki panel kablosunun HDA işlevini desteklemesi gerekmektedir. Sisteminizi kurarken, lütfen kılavuzumuzdaki talimatlar ile kasa kılavuzundaki talimatları izleyin. 2. AC'97 ses paneli kullanıyorsanız, lütfen aşağıdaki adımları uygulayarak ön panel ses bağlantısına takın:...
  • Seite 78 TPM bağlantısı Bu bağlayıcı, anahtarlar, dijital (17-pin TPMS1) sertifikalar, parolalar ve verileri (bkz. sf.1, No. 8) güvenli bir şekilde saklama özelliği bulunan Güvenilir Platform Modülü (TPM) sistemini destek- ler. TPM sistemleri, aynı zamanda ağ güvenliğinin artırılması, dijital kimliklerin korunması ve platform bütünlüğünün sağlanmasına da yardımcıdır.
  • Seite 79 ASRock B150M-PIO 마더보드를 구입해 주셔서 감사합니다 . 이 마더보드는 ASRock 의 일관되고 엄격한 품질관리 하에 생산되어 신뢰성이 우수하며 , 품질 과 내구성에 대한 ASRock 의 기준에 부합하는 우수한 성능과 견고한 설계를 제 공합니다 . 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 문서의...
  • Seite 80 1.2 규격 • uDTX 폼 팩터는 PIO 와 Micro ATX 를 지원합니다 . 플랫폼 • 솔리드 콘덴서 구조 • 6 세대 Intel® Core i7/i5/i3/Pentium®/Celeron® 프로세서 ( 소 켓 1151) 지원 • 최대 95W 까지 CPU 지원 • Digi Power design •...
  • Seite 81 후면 패널 • PS/2 키보드 포트 1 개 • DVI-D 포트 1 개 • USB 2.0 포트 2 개 (ESD 보호 지원 (ASRock 풀 스파이크 보 호 ))* * ACPI 절전 모드 해제 기능은 USB01 포트에서만 지원됩니다 . • USB 3.0 포트 2 개 (ESD 보호 지원 (ASRock 풀 스파이크 보...
  • Seite 82 인증 • ErP/EuP 사용 가능 (ErP/EuP 사용 가능 전원공급장치 필요 ) * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 : http://www.asrock.com BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체 의 오버클로킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위...
  • Seite 83 B150M-PIO 1.3 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구 적으로 손상됩니다 . 시스템 패널 헤더 섀시의 전원 스위치 , PLED+ PLED- (9 핀...
  • Seite 84 섀시 침입 및 스피커 헤더 섀시 침입 및 섀시 스 SPEAKER DUMMY (7 핀 SPK_CI1) 피커를 이 헤더에 연결 DUMMY (1 페이지 , 9 번 항목 참조 ) 하십시오 . SIGNAL DUMMY 시리얼 ATA3 커넥터 이들 두 개의 SATA3 커 넥터는...
  • Seite 85 B150M-PIO 1. 고음질 오디오는 잭 감지를 지원하지만 올바르게 작동하려면 섀시의 패널 와 이어가 HDA 를 지원해야 합니다 . 설명서 및 섀시 설명서에 나와 있는 지침을 따라 시스템을 설치하십시오 . 2. AC’97 오디오 패널을 사용할 경우 아래와 같은 절차를 따라 전면 패널 오디오...
  • Seite 86 TPM 헤더 이 커넥터는 키 , 디지털 인 (17 핀 TPMS1) 증서 , 암호 및 데이터를 (1 페이지 , 10 번 항목 참조 ) 안전하게 보관할 수 있는 TPM(Trusted Platform Module) 시스템을 지원합니다 . TPM 시스템은 네트워크 보안을 강 화하고 , 디지털 신원을 보호 하며...
  • Seite 87 アルの内容は予告なしに変更するこ とがあります。 このマニュアルの内容に変更が あった場合には、 更新されたバージョンは、 予告なくASRock のウェブサイ トから 入手できるようになります。 このマザーボードに関する技術的なサポートが必要な 場合には、 ご使用のモデルについての詳細情報を、 当社のウェブサイ トで参照く だ さい。 ASRock のウェブサイ トでは、 最新の VGA カードおよび CPU サポート一覧 もご覧になれます。 ASRock ウェブサイ ト http://www.asrock.com. 1.1 パッケージの内容 • ASRock B150M-PIO マザーボード (uDTX フォームファクター) • ASRock B150M-PIO クイックインストールガイ ド...
  • Seite 88 1.2 仕様 • uDTX フォームファクタは PIO および Micro ATX に対応し プラット ます フォーム • 固体コンデンサ設計 • 第 6 世代 Intel® Core i7/i5/i3/Pentium®/Celeron® プロセッサ ーに対応 (ソケッ ト 1151) • 95W まで CPU をサポート • Digi Power design • 5 電源フェーズ設計 • Intel® ターボブースト 2.0 テク ノロジーをサポート •...
  • Seite 89 • 1 x PS/2 マウスポート リアパネル • 1 x PS/2 キーボードポート • 1 x DVI-D ポート • 2 x USB 2.0 ポート (静電気放電 (ESD) 保護に対応 (ASRock 完全スパイク保護) ) * * ACPI ウェークアップ機能に対応するのは USB01 ポート上だ けです。 • 2 x USB 3.0 ポート (静電気放電 (ESD) 保護に対応 (ASRock 完全スパイク保護)...
  • Seite 90 • Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit * Windows® 7 OS をインストールするために、 xHCI ドライバが ISO ファイルに含まれる変更されたインストールディスクが必 要です。 詳しい説明については 114 ページを参照してく ださい。 * 更新された Windows® 10 ドライバについては、 ASRock のウェ ブサイ トで詳細をご確認く ださい : http://www.asrock.com • FCC、 CE、 WHQL 認証...
  • Seite 91 B150M-PIO 1.3 オンボードのヘッダーとコネクター オンボードヘッダーとコネクターはジャンパーではありません。 これらヘッダーとコ ネクターにはジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクター にジャンパーキャップを被せると、 マザーボードに永久損傷が起こるこ とがありま す。 システムパネルヘッダー 電源スイッチを接続 PLED+ PLED- (9 ピンパネル 1) し、 スイッチをリセッ ト PWRBTN# (p.1、 No. 8 参照) し、 下記のピン割り当 てに従って、 シャーシ のシステムステータス RESET# HDLED- 表示ランプをこのヘッ HDLED+ ダーにセッ トします。 ケーブルを接続する ときには、 ピンの+と...
  • Seite 92 シャーシイントルージョンと シャーシイントルー SPEAKER DUMMY スピーカーヘッダー ジョンとシャーシス DUMMY (7 ピン SPK_CI1) ピーカーをこのヘッ (p.1、 No. 9 参照) ダーに接続してく ださ い。 SIGNAL DUMMY シリアル ATA3 コネクター これら 2 つの SATA3 コネクターは、 最高 6.0 (SATA3_1: p.1、 No. 7 参照) Gb/ 秒のデータ転送 速度で内部ストレー (SATA3_2: p.1、 No. 6 参照) ジデバイス用の...
  • Seite 93 B150M-PIO 1. ハイディフィニションオーディオはジャックセンシングをサポートしていますが、 正しく機能するためには、 シャーシのパネルワイヤーが HDA をサポートしてい るこ とが必要です。 お使いのシステムを取り付けるには、 当社のマニュアルおよ びシャーシのマニュアルの指示に従ってく ださい。 2. AC 97 オーディオパネルを使用する場合には、 次のステップで、 前面パネルオー ディオヘッダーに取り付けてく ださい。 A. Mic_IN (MIC) を MIC2_L に接続します。 B. Audio_R (RIN) を OUT2_R に、 Audio_L (LIN) を OUT2_L に接続します。 C. アース (GND) をアース (GND) に接続します。...
  • Seite 94 TPM ヘッダー このコネクターはトラステッ (17 ピン TPMS1) ドプラッ トフォームモジュール (p.1、 No. 10 参照) (TPM) システムをサポート し、 鍵、 デジタル証明書、 パス ワード、 データを安全に保管 するこ とができます。 TPM シ ステムはまた、 ネッ トワーク セキュリティを高め、 デジタ ル証明書を保護し、 プラッ ト フォームの完全性を保証し ます。...
  • Seite 95 恕不另行通知。如果本文档有任何修改,则更新的版本将发布在华擎网站上, 我们不会另外进行通知。如果您需要与此主板相关的技术支持,请访问我们的 网站以具体了解所用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 B150M-PIO 主板(uDTX 规格尺寸) • 华擎 B150M-PIO 快速安装指南 • 华擎 B150M-PIO 支持光盘 • 2 x 串行 ATA (SATA) 数据线(选购) • 1 x I/O 面板 • 1 x 螺丝(供 mini-PCIe 插槽使用)...
  • Seite 96 1.2 规格 • uDTX 规格支持 PIO 和 Micro ATX 平台 • 稳固的电容器设计 • 支持第 6 代 Intel® Core i7/i5/i3/Pentium®/Celeron® 处理器 (Socket 1151) • 支持高達 95W 的 CPU • Digi Power design • 5 电源相设计 • 支持 Intel® Turbo Boost 2.0 技术 •...
  • Seite 97 B150M-PIO • 7.1 CH 高清音频(Realtek ALC887 音频编解码器) 音频 * 要配置 7.1 CH 高清音频,需要使用高清前面板模块和通过 音频驱动程序启用多通道音频功能。 • 支持电涌保护(华擎全防护) • ELNA 音频电容 • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111GR • 支持远端開机功能 • 支持 Wake-On-LAN(网上唤醒) • 支持雷电 /ESD 保护(华擎全防护) • 支持 LAN 线缆检测...
  • Seite 98 • Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit 操作系统 * 要安装 Windows® 7 OS,需要 xHCI 驱动程序已封装到 ISO 文件的经修改的安装盘。请参考第 114 页了解详情。 * 有关已更新的 Windows® 10 驱动程序,请访问华擎网站了解 详情 : http://www.asrock.com • FCC、CE、WHQL 认证 • ErP/EuP 支持(需要支持 ErP/EuP 的电源) * 有关详细产品信息,请访问我们的网站: http://www.asrock.com 须认识到超频会有一定风险,包括调整...
  • Seite 99 B150M-PIO 1.3 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。将跳线帽装 到这些接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配, PLED+ PLED- (9 针 PANEL1) 将机箱上的电源开关、 PWRBTN# (见第 1 页, 第 8 个) 重置开关和系统状态指 示灯连接到此接脚。在 RESET# 连接线缆前请记下正负 HDLED- 针脚。 HDLED+ PWRBTN(电源开关): 连接到机箱前面板上的电源开关。您可以配置使用电源开关关闭系统的方式。 RESET(重置开关): 连接到机箱前面板上的重置开关。如果计算机死机,无法执行正常重新启动, 按重置开关重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。系统 处在 S1/S3 睡眠状态时,此 LED 闪烁。系统处在 S4 睡眠状态或关机 (S5) 时,...
  • Seite 100 机箱侵入和扬声器接脚 请将机箱侵入和机箱扬 SPEAKER DUMMY (7 针 SPK_CI1) 声器连接到到此接脚。 DUMMY (见第 1 页,第 9 个) SIGNAL DUMMY 串行 ATA3 接口 这 2 个 SATA3 接口支持 最高 6.0 Gb/s 数据传输 (SATA3_1: 见第 1 页, 第 7 个) 速率的内部存储设备的 SATA 数据线。 (SATA3_2: 见第 1 页, 第 6 个) USB 2.0 接脚...
  • Seite 101 B150M-PIO 1. 高清音频支持插孔感测,但机箱上的面板连线必须支持 HDA 才能正常工作。 请按照我们的手册和机箱手册的说明安装系统。 2. 如果您使用 AC’97 音频面板,请按照以下步骤将它安装到前面板音频接脚: A. 将 Mic_IN (MIC) 连接到 MIC2_L。 B. 将 Audio_R (RIN) 连接到 OUT2_R,将 Audio_L (LIN) 连接到 OUT2_L。 C. 将接地端 (GND) 连接到接地端 (GND)。 D. MIC_RET 和 OUT_RET 只用于高清音频面板。您不需要针对 AC’97 音频 面板连接它们。 E. 要启用前麦克风,请转到 Realtek 控制面板上的“FrontMic”(前麦克风)...
  • Seite 102 TPM 接脚 此接口支持 Trusted Platform (17 针 TPMS1) Module(信任平台模块, (见第 1 页,第 8 个) TPM)系统,可以安全地存储 密钥、数字证书、密码和数据。 TPM 系统也可以帮助增强网络 安全,保护数字身份和确保平 台完整性。...
  • Seite 103 B150M-PIO 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。...
  • Seite 104 行通知。如本文件有任何修改,可至華擎網站逕行取得更新版本,不另外通知。 若您需要與本主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的 特定資訊。您也可以在華擎網站找到最新的 VGA 卡及 CPU 支援清單。華擎網 站 http://www.asrock.com。 1.1 包裝內容 • 華擎 B150M-PIO 主機板 (uDTX 尺寸 ) • 華擎 B150M-PIO 快速安裝指南 • 華擎 B150M-PIO 支援光碟 • 2 x Serial ATA (SATA) 資料纜線(選用) • 1 x I/O 面板外罩 • 1 x 螺絲(適用於 mini-PCIe 插槽)...
  • Seite 105 B150M-PIO 1.2 規格 • uDTX 尺寸支援 PIO 和 Micro ATX 平台 • 固態電容設計 • 支援第 6 代 Intel® Core i7/i5/i3/Pentium®/Celeron® 處理器 (插座 1151) • 支援高達 95W 的 CPU • Digi Power design • 5 電源相位設計 • 支援 Intel® Turbo Boost 2.0 技術...
  • Seite 106 • 7.1 CH HD 音訊(Realtek ALC887 音訊轉碼器)功能 音訊 * 若要設定 7.1 CH HD 音訊,必須使用 HD 前面板音訊模組, 並透過音訊驅動程式啟用多聲道音訊功能。 • 支援突波保護(華擎全防護) • ELNA 音響級電容 • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111GR • 支援 Wake-On-WAN • 支援網路喚醒 • 支援雷擊/靜電保護(華擎全防護) • 支援 LAN 纜線偵測 •...
  • Seite 107 7 64 位元 * 若要安裝 Windows® 7 作業系統,需要使用修改過的安裝光 碟(已將 xHCI 驅動程式封裝至 ISO 檔案)。如需詳細說明, 請查看第 114 頁。 * 關於最新 Windows® 10 驅動程式的詳細資訊,請瀏覽華擎網 站:http://www.asrock.com • FCC、CE、WHQL 認證 • ErP/EuP Ready(需具備 ErP/EuP ready 電源供應器) * 如需產品詳細資訊,請上我們的網站: http://www.asrock.com 請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、 採用自由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定 性,或者甚至會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成 本。我們對於因超頻所造成的可能損害概不負責。...
  • Seite 108 1.3 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽 套在排針及接頭上,將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排 PLED+ PLED- 列將機殼上的電源開 (9-pin PANEL1) PWRBTN# (請參閱第 1 頁, 編號 8) 關、重設開關及系統 狀態指示燈連接至此 RESET# 排針。在連接纜線之 HDLED- 前請注意正負針腳。 HDLED+ PWRBTN ( 電源開關 ): 連接至機殼前面板上的電源開關。您可設定使用電源開關關閉系統電源的方 式。 RESET ( 重設開關 ): 連接至機殼前面板上的重設開關。若電腦凍結且無法執行正常重新啟動,按下 重設開關即可重新啟動電腦。 PLED ( 系統電源 LED): 連接至機殼前面板上的電源狀態指示燈。系統正在運作時,此...
  • Seite 109 B150M-PIO 機殼防護排針 機殼防護排針連接至 SPEAKER DUMMY 此排針。 (7-pin SPK_CI1) DUMMY (請參閱第 1 頁,編號 9) SIGNAL DUMMY Serial ATA3 接頭 這兩組 SATA3 接頭 皆支援內部儲存裝置 (SATA3_1: 請參閱第 1 頁,編號 7) 的 SATA 資料纜線, 最高可達 6.0 Gb/s 資 (SATA3_2: 請參閱第 1 頁,編號 6) 料傳輸率。...
  • Seite 110 1. 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing),但機殼上的面板線必 須支援 HDA 才能正確運作。請依本手冊及機殼手冊說明安裝系統。 2. 若您使用 AC’97 音訊面板,請按照以下步驟安裝至前面板音訊排針: A. 將 Mic_IN (MIC) 連接至 MIC2_L。 B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。 C. 將接地 (GND) 連接至接地 (GND)。 D. MIC_RET 及 OUT_RET 僅供 HD 音訊面板使用。您不需要在 AC’97 音訊 面板上連接。...
  • Seite 111 B150M-PIO TPM 標頭 此接頭支援信賴平台模組 (TPM) 系統,可確保儲存金 (17-pin TPMS1) (請參閱第 1 頁,編號 10) 鑰、數位憑證、密碼及資料 的安全。TPM 系統也能強 化網路安全、保護數位身分 並確定平台完整性。...
  • Seite 112 Spesifikasi • Bentuk dan Ukuran uDTX mendukung PIO dan Micro ATX Platform • Desain Kapasitor Solid • Mendukung Prosesor i7/i5/i3/Pentium®/Celeron® (Soket 1151) Intel® Core Generasi ke-6 • Mendukung CPU hingga 95 W • Digi Power design • Desain 5 Fase Daya • Mendukung Teknologi Intel®...
  • Seite 113 • 1 x Port Keyboard PS/2 Belakang • 1 x Port DVI-D • 2 x Port USB 2.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection))* * Fungsi pengaktifan ACPI hanya didukung pada port USB01. • 2 x Port USB 3.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 1 x Port LAN RJ-45 dengan LED (ACT/LINK LED dan...
  • Seite 114 * Untuk menginstal OS Windows® 7, diperlukan disk instalan termodifikasi dengan driver xHCI dalam file ISO. Untuk petunjuk lebih rinci, lihat halaman 114. * Untuk driver Windows® 10 terbaru, kunjungi situs web ASRock untuk mendapatkan info rinci:http://www.asrock.com • FCC, CE, WHQL Sertifikasi • Siap untuk ErP/EuP (memerlukan catu daya untuk ErP/EuP)
  • Seite 115 B150M-PIO * Untuk informasi tentang produk rinci, kunjungi situs web kami: http://www.asrock.com Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat overclocking pihak ketiga. Overclocking dapat mempengaruhi stabilitas sistem, atau bahkan dapat mengakibatkan kerusakan komponen dan perangkat sistem. Risiko dan biaya apapun menjadi tanggungan Anda.
  • Seite 116 Requirements • A Windows® 7 installation disk or USB drive • USB 3.0 drivers (included in the ASRock Support CD or website) • A Windows® PC • Win7 USB Patcher (included in the ASRock Support CD or website) Scenarios...
  • Seite 117 Select the “Win7 Folder” from Step1 by clicking the red circle as shown as the picture below. Step 4 Select the “USB Driver Folder” by clicking the red circle as shown as the picture below. If you are using ASRock’s Support CD for the USB 3.0 driver, please select your CD-ROM.
  • Seite 118 Step 5 Select where to save the ISO file by pressing the red circle as shown as the picture below. Step 6 If you want to burn the patched image to a CD, please check “Burn Image” and select “Target Device to Burn”.
  • Seite 119: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at http://www.asrock.com/support/tsd.asp...
  • Seite 120: Ec Declaration Of Conformity

    EC-Declaration of Conformity For the following equipment: Motherboard (Product Name) B150M-PIO / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) is herewith confirmed to comply with the requirements set out in the Council...

Inhaltsverzeichnis