Cleaning & Maintenance - Lauben LBNVTK01S Benutzerhandbuch

7. If you want to change the displayed units of Celsius to Fahrenheit, press  and  at the same time.
8. After reaching the boiling point, take out kettle from its base, press pouring button and pour the water.
9. NOTE: When pouring water, do not open its lid to avoid the risk of scalds.
If the appliance is not used, disconnect it, dry it out, clean it and put on its base.
Protection against boiling when dry
If you, incidentally, let the kettle to boil without water inside, the protective device against dry boiling will turn it off automatically. If
such situation occurs, let the kettle to cool down before filling it with cold water and repetitive boiling.
Cleaning & maintenance
■
Proper maintenance of this appliance will secure trouble-free operation and will help to avoid the risk of its damage.
■ Keep this appliance from extreme moisture and temperature and do not expose the appliance to a long-term direct sunlight or
ultraviolet radiation.
■ Avoid the appliance falling down and don't expose it to hard collisions.
■ Don't expose this appliance to acute and quick temperature changes. It could cause condensation inside, resulting in potential
damage to appliance. In the event of condensation, let the appliance to dry out completely before its next use.
■ Display surface may become scratched easily. Avoid its contact with sharp items.
■
Don't try to disassemble this machine, repair it or adjust it in any way. In the event of disassembly, adjustments or any other effort
to repair it, warranty will become invalid and appliance may become damaged or injuries or damage to property may occur.
■
Overheating may damage this appliance.
1. Before cleaning this kettle, always disconnect it from power socket. NEVER pour this kettle or base into water and avoid moisture
to get into contact with these parts in the event of any electrical current therein.
2. Outside cleaning: wipe out outside parts of kettle with soft wet dish cloth and dry out with another cloth.
3. Note: NEVER use chemicals, metallic items nor any other abrasive detergents for cleaning.
4. Sediments removal: Minerals in water may form sediments at the bottom, affecting the functionality of kettle adversely. Therefore,
it's necessary to clean this kettle from limescale. Please, follow the instructions when using detergents.
HINT Prepare the cleaning solution at home:
a. Fill the kettle with three cups of white vinegar and add water then until the level does not exceed sediments in kettle.
Leave it there overnight.
b. Pour out the solution from kettle. Fill the kettle with pure water up to maximum level. After boiling it, pour it out. Repeat
couple of time, until the taste of vinegar vanishes.
5. In the event of storing or not using it, do not fold the power cord.
Note
1. Before connecting it to grid, make sure the lid is tightly secured.
2. Before placing the kettle onto its base, make sure it's dry and clean.
DE
3. If the temperature difference of water and required temperature is below 5° C / 40° F, power supply will be turned off (i.e.
appliance does not perform heating).
EN 4. NEVER use chemicals, metallic items nor any other abrasive detergents for cleaning.
5. In the standby or heating mode, press the  button once to increase temperature by 5 ° C / 40 ° F. Indicator will show actual
temperature.
CZ
6. With no instruction, display light will turn off after 30 seconds in standby mode. Display may be activated by pressing any button
and the inside temperature will be seen at a display. If you press  or , required setting will be displayed at its display.
7. When water reaches required temperature, appliance will stop heating and switch to standby mode while notify you by "beeping".
SK
8. While heating, stop boiling by pressing the ON/OFF button. Appliance will stay ni standby mode.
9. If there's not kettle on the base, "---" will be displayed. If there's not boil, display will turn off if there's not instruction in 30 seconds.
1. The symbol on the product and in the documentation indicates
that used electronics shall not be disposed of into communal
waste. When disposing of appliances, take them to the designated
waste collection yard, where they will be accepted for free. Proper
disposal will help to preserve precious natural resources and protect
the environment as well as public health, which both may get
8 |
threatened by improper disposal and its consequences. For further
detail contact the local authorities or the nearest waste collection
yard. Improper disposal of electrical appliances may result in fining in
compliance with state regulations. Disposal information for users
of electrical and electronic appliances (industrial use): Disposal
information for users of electrical and electronic appliances are to