Recording Formats; Recording (Mono/Stereo/2Mix) - Tascam DR-70D Bedienungsanleitung

Recording formats

You can select the format of files created by this unit.
8 MONO recording
The channels selected for recording will be recorded
as mono files.
A file will be made for each channel selected for
recording.
8 STEREO recording
Stereo files will be recorded.
Examples:
If only channel 1 is selected for recording, a stereo
file with channel 2 silent will be created.
If only channels 1 and 3 are selected for recording,
stereo files with channels 2 and 4 silent will be
created.
8 2MIX recording
The input signals set on the BASIC screen will be
recorded as a stereo file.
Even if all four channels are selected for recording, a
stereo file will be created.
Recording (MONO/
STEREO/2MIX)
8 Make recording settings
Press the MENU button to open the
1.
screen.
Turn the DATA dial to select
2.
RECORD
the DATA dial.
The screen opens.
RECORD SETTING
Turn the DATA dial to select
3.
FILE TYPE
press the DATA dial.
Turn the DATA dial to select the recording
4.
format.
Options: MONO, STEREO (default), 2MIX
Press the DATA dial to enable selection of other
5.
items.
When finished, press the MENU button to
6.
return to the Home Screen.
8 Setting where to save files
Press the MENU button to open the
1.
screen.
Turn the DATA dial to select
2.
BROWSE
the DATA dial.
The screen opens.
BROWSE
On the screen, select the folder where
3.
BROWSE
you want to save recorded files, and press the
DATA dial.
This opens the browse menu pop-up.
Turn the DATA dial to select
4.
the DATA dial.
The Home Screen reopens, and the selected
5.
folder is where recorded files will be saved.
8 Starting recording
MENU
Press the record (0) button to start recording.
1.
, and press
, and
When recording starts, the REC indicator
lights and the display shows the project
name, elapsed recording time and remaining
recording time.
Press the record (0) or 1/8 button to stop
2.
recording.
MENU
, and press
, and press
SELECT
15
TASCAM DR-70D