Technical Features - RIGO MRI Gebrauchs- Und Wartungshandbuch

A
No. Description Airbrushes
Nozzle with three position adjustable painting
1
locknut.
2 Air pipe connection.
3 Product quantity adjustment flywheel.
4 Airbrush body made of die-cast aluminium.
5 Distribution lever.
6 1000 cc lower tank.
Dear Customer,
We want to thank you for choosing this product. Our company is a leading reference point in the field of the construction of
painting machinery and systems. Our company has always meant great reliability, quality and safety. All our products have
been designed and manufactured to guarantee the best performance ever. We feel confident we have further improved
working standards and we are certain we have met all safety requirements, because our units have the DECLARATION
OF CONFORMITY to European Directives.
1 INFORMATION LETTER AND USE OF ThE MANUAL
This use and maintenance manual is an integral part of the machine and the user must have knowledge of its content.
Although the main features of the machine described in this manual are not subject to change, our company reserves
the right to change those components, details and accessories it deems necessary to improve the machine or to meet
manufacturing or commercial requirements, at any time and without updating this manual immediately.
ALL RIGHTS ARE RESERVED. The reproduction of any part of this manual, in any given form, without prior written
authorization from our company, is strictly forbidden.
2 ChECK OF ThE PURChASED PRODUCT
The original configuration of the painting airbrush must not be changed. Our original accessories and spare parts
will always guarantee all safety standards.
On receipt of goods check that:
- The package is intact and is not damaged.
- All the necessary documentation for the correct installation and use of the equipment is enclosed.
Please inform the dealer in case of damages.
3 STANDARD FITTED EQUIPMENT
The type MRI-MRS-MBA airbrushes come with the following equipment:
1 Use manual completed with Certificate of conformity in compliance with the EC STANDARDS and Guarantee Certificate
The MRI-AS airbrush with a 1.3 diameter assembled nozzle comes with the following:
1 Locknut for enemel*
1 Spanner for nozzle replacement*
1 1.7-2.5 diameter nozzles*
1 Heat resistant casing
* Also inserted in the MRI - MRS MBA airbrush only in some countries.
4 AIRBRUSh DESCRIPTION
Our airbrushes combined to TMR turbines allow various coverings to be applied on different supports (metal, wood,
masonry...). The complete system allows obtaining a smooth and uniform surface. The quantity of the covering product
coming out can be adjusted according to its density/viscosity using the special adjusting screw and for the MRS MBA
versions by using the faucet on the cover. Moreover, various types of spray can be obtained (oval vertical, oval horizontal
or round) by rotating the locknut keeping down the fog effect.
5 DESCRIPTIVE DRAWING Airbrushes (See the drawing A, page 3)

6 TEChNICAL FEATURES

The features of the airbrush ensure that the covering product is atomised and surround it in a jet of air so that it is softly
deposited with precision on the support to be painted.
Thus it prevents or limits the fog effect reducing the dispersion of the sprayed material in the air by 20-40% in comparison
with the traditional system. As a result, the efficiency increases up to 60-80%, also a benefit for the operator's health and
for the environment.
No. Description Airbrushes
7 1000 cc lower pressure tank.
8 Pressure tank closure.
9 750 cc upper gravity tank.
10 Product quantity regulator.
11 2000 cc upper gravity tank
- 7 -
EN
ThE MANAGEMENT