Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Information
1. Open a package, take out the camera, and unscrew the camera shell.
2. Take out the positioning label delivered with the camera and drill three holes on
the ceiling or wall based on the marks on the positioning label,
nail swell plastic
buttons into drilled holes.
3. Connect the multi-connector cable and fix the camera to the ceiling(or wall) by use
of
self-tapping screws; Loosen the direction focusing screw, position left-right
up/down to adjust the angle of
the camera that the camera faces the monitored
area, then fix the direction focusing screw.
4.Adjust view angle and focal length by using an adjusting tool.
5. Fix the camera shell.
16
Werbung
Inhaltsverzeichnis
