Setup - Kingston MobileLite Wireless Bedienungsanleitung

Setup

Once you're connected to the MobileLite Wireless network, you can begin to configure your device by launching
the MobileLite application. You must perform 3 quick, simple steps before you begin to access your MobileLite
Wireless. Please see below.
Note: The initial setup will only be displayed the first time that you launch the MobileLite app. For any
future changes, you will be required to navigate to the device settings. See page 18.
Figure 7.1: Name/SSID change
Figure 7.2: Set password
Document No. 480-15FUM-001.A00
The first step provides the option to change
the name/SSID (MobileLiteWireless).
will prevent any confusion when multiple
devices exist within close proximity. Please
see Figure 7.1.
In Figure 7.2, you will notice the option to
password
unauthorised users. With the WPA2 security
protocol in effect, only users who are given
the password will have access to the device.
The password must contain a minimum of 8
characters.
Kingston MobileLite Wireless
protect your device
This
from
Page 7 of 20