STROMBERG Baderumsmobler Montageanleitung Seite 3

GB
BATHROOM FURNITURE ASSEMBLY AND MAINTENANCE INSTRUCTIONS
BATHROOM FURNITURE INSTALLATION
Bathroom furniture should be mounted on the wall at a moderate distance from bath or shower cabin or toilets to avoid
the splashes of water or soap. Recommended height of hanging of the cabinets is presented in drawing No. 1.
NOTE: be careful during installation and assembly. Any strong mechanical influence may damage painted or laminated
surface, mirrors and electrical parts. Put the article on soft and clean surface during installation. For the article installation
use only original fittings supplied with the article. The article can be damaged or broken later on if unoriginal fittings are
used.
WASHBASIN INSTALLATION
In order to protect the basin unit from moisture, silicone or another water resistant hermetic should be used on top of the
cabinet before laying the washbasin on it. It is also necessary to fill in the gap between the wall and washbasin with silicon
or any other water resistant hermetic. The gap is filled in as soon as the washbasin is put on top of the cabinet. The remains
of hermetic should be cleaned immediately without allowing them to dry.
ELECTRICAL CONNECTION
The electrical part of the cabinets are fully assembled and prepared to be connected to the standard ~220V-50Hz mains.
No additional equipment is needed. Recommended installation areas are presented in the drawings No. 1 and 2. For
detailed instructions please, refer to assembly instructions for electrical parts.
IP44.
NOTE: always disconnect the supply of electricity before the installation and during cleaning process. In case of any
questions, consult the qualified personnel. Electrical installation should comply with the local regulations.
ASSEMBLY AND ADJUSTMENT OF HINGES
Hinges are mounted with screws of 3,5x15 mm. Tall cabinet doors are supplied loose, door hinges are fixed according to
the required opening direction. After installation of hinges, always adjust the doors (see diagrams on furniture installation
supplied separately).
MAINTENANCE OF BATHROOM FURNITURE
Bathroom furniture should be installed in heated and well ventilated room where the temperature ranges from +5 to
+35oC. Furniture must not be too close to the heating. Preserve furniture from:
direct water and steam effects: rooms must be dry and well-ventilated;
–
mechanical impact: avoid scratching the surface or striking it;
–
liquid impact: any liquids should be immediately cleaned from the surface. Many concentrated cosmetic liquids may
–
damage the furniture surfaces.
EVERYDAY CARE
All the materials used for the production of bathroom furniture are easily maintained and cleaned. Do not use abrasive or
solvent based cleaning agents. We recommend cleaning the furniture with a damp microfiber cloth as well as thoroughly
cleaning a moistened surface with a clean, dry cloth. For cleaning of mirrors, use only special cleaning agents containing
no abrasive particles.
Periodically clean ceramic washbasins with agents for cleaning of ceramic surfaces; stoneware ceramic washbasins –
with soft cleaning agents designed for stoneware surfaces. To restore the shine of the surface of stoneware washbasins
periodically polish them with special polishing paste.
GUARANTEE
All products are provided with a 2 (two) year guarantee from the date of purchase.The guarantee is limited to the value of
the product; It does not include the cost of installation, dismantling, transportation related to the change. The guarantee
does not include the damage caused to the product due to improper storage, installation or breach of conditions related to
its use, impact of extreme temperatures or aggressive liquids (solvents, dissolvent, alkaline, etc). Product guarantee shall
not apply in cases of remodelling, cutting, changing or other modifications of the product done by the customer.