Specifications - Corsa Osmotic ZERO Kurzanleitung

WARNINGS
The equipment includes a pressure regulator rated at 3.5 bars.
The equipment can work at a pressure range between 1.5 and 5,5 bars.
This equipment contains an ultraviolet lamp. The ultraviolet light emitted by the
equipment could cause irritation or injury to skin or eyes, so that contact with it should
be avoided during operation.
Before connecting the equipment to the mains electricity, connect the water supply and
ensure there are no losses.
PARTS OF THE EQUIPMENT
Permeate, water
produced
(WHITE 5/16")
Water intake
(BLUE 1/4")
ACCESSORIES FOR INSTALLATION
RED 1/4" tube 2m (1 unit)
BLUE 1/4" tube 2m (1 unit)
BLUE 5/16" tube 2m (1 unit)

SPECIFICATIONS

Power supply: 220-110 V 50/60 Hz; 24 VDC 4A
Dimensions: Height - 350 mm Width - 270 mm Length – 408 mm
Intake temperature: 5-38ºC
Maximum TDS of intake water <1500 ppm
Reject, drain
Water
(RED 1/4")
recovery
(BLUE 5/16")
WHITE 5/16" tube 2m (1 unit)
5-way valve 3/8" (1 unit)
Pressurized drain kit
Power supply
Pressure
Tap coupling
transducer
coupling