Troubleshooting - Scansonic A200 Minimate Bedienungsanleitung

Troubleshooting

Basic troubleshooting
If the red 'off' indicator lamp does not light up, check...
• that the power cord is firmly plugged into the wall outlet
• that the POWER switch on the rear panel is ON
• that the mains voltage is correct and matching the amplifier
If no sound, check...
• that the Minimate™ is turned on (blue glow around knob)
• that the VOLUME control on the front panel is not all the way down
• that the line in, optical or coaxial input cable is firmly plugged in
• that the loudspeaker cables has been connected properly
If sound is distorted, check...
• that speaker cables are not contacting each other
• that volume is too high
• that input cables are not damaged
• that speakers are not damaged – try switch left and right speaker