Controlling The Display; The Menu; Main Screen - KMS CAN display Anleitung Für Installation Und Setup

EN—NL—DE
kms.vankronenburg.nl

5. Controlling the display

EN
There are two buttons on the right side of the CAN display. With these two buttons
you can control all the options on the display.
The top/upper button is the 'enter' button. With this button you can confirm the
option that is selected (the illuminating beam) in the display. Pressing the 'enter
button' once while you're in the main screen of the display, opens the main menu
of the display. Holding the 'enter button' for a longer period of time will cause the
brightness of the screen to fade for driving at night. The brightness can be adjusted
in the main menu for both daylight and night driving.
The lowest button of the two is the scrolling button. You can scroll down the menu
with this button to select other options.
By touching the 'scrolling down button' when you are in the main screen of the
display, you can change the layout of the display into 5 different preset layouts. In
the menu of the CAN display you can configure these layouts to your own require-
ments and save them. See chapter 6 for more information.

6. The menu

6.1 Main screen

After connecting the display in the right way, the start-up screen will appear. This
screen will disappear within 5 to 10 sec.
The following screen on the display is the main screen. Using the 'scrolling down
button' you can choose between 5 layouts. These 5 screens can be configured to
suit your own requirements, as will be described later.
Pressing the 'enter button' when you are in the main screen, will open the menu of
the display.
Above the screen are 7 LED lights which all have two functions. Each LED can be
configured as a warning or indication light for different variables such as oil pres-
sure, water temperature, A.L.S., etc. When a warning light goes on, the exceeded
limit will be flashing in the display.
The second function is to act as a shiftlight. This can also be completely adjusted to
suit your own requirements.
__________________________________________________________
KMS CAN display
7
Part nr: 01-01-01-0009