S&P SILENT DUAL series Handbuch Seite 10

ENGLISH
SILENT DUAL axial extractor fans
Please read this instruction booklet carefully
before installing or starting up the product. It
contains important information on personal
and user safety measures to be followed whilst
installing, using and carrying out maintenance
work on the equipment.
The SILENT DUAL extractor fans have been
manufactured following current technical sa-
fety regulations, production and quality stan-
dards as laid down by the international Quality
Standard ISO 9001. All components have been
checked and every one of the fi nal products will
have been individually tested at the end of the
manufacturing process.
Check that the product is in perfect condition
while unpacking. Make sure that the product
corresponds to the one you have ordered and
that the details on the instruction plate fulfi l
your requirements.
The installation must be carried out in accor-
dance with the electrical standards in force in
your country. Once the product has been insta-
lled, pass this booklet to the end user.
RECOMMENDATIONS
IMPORTANT: Before installing
and wiring the unit, ensure that
the main supply is disconnected.
Working ambient temperatu-
re for fan equipment should
not be exceeded. Typically, this
falls within -5°C to +40°C, un-
less stated otherwise.
The spigot cannot be connec-
ted to a duct which is used to
extract smoke from gas or any
other fuel appliance.
10
The extractor must not be used
in explosive or corrosive at-
mospheres.
If the SILENT DUAL fan is ope-
rating in a room where there
is a boiler or any other kind of
combustion device that requi-
res airfl ow to work, check that
the air inlets to the room are
suffi cient.
This appliance can be used by
children aged from 8 years and
above and persons with redu-
ced physical, sensory or men-
tal capabilities or lack of expe-
rience and knowledge if they
have been given supervision
or instruction concerning use
of the appliance in a safe way
and understand the hazards in-
volved. Children shall not play
with the appliance. Cleaning
and user maintenance shall
not be made by children wi-
thout supervision.
Installation (fi g.1):
1. Front grille
2. Front grille support
3. Connection terminals
4. Outlet
5. Removable backdraught shutter
6. Cable entry
7. Setting dip switches