Humidity Hysteresis Setting; Minimum Speed Setting; Maximum Speed Setting - GSE AC-EC Bedienungsanleitung

Manual AC-EC LCD fan controller 2x5A
repeat again, enter the settings push the knob or go to the next setting
EN
turning clockwise the knob.
Hysteresis setting for the humidity day time, as described above the
hysteresis for temperature you can change here the controlling range for
the humidity value.
For example: 10%rh at 60% humidity the fan starts to work at 60%
humidity and +10%rh at 70%rh it reaches its maximum speed.
Minimum speed setting day time. Here you can choose the minimum
speed of the ventilator which never should be undercut. On the down left
side speed bar you can see the actual setting for each filled segment is 10%
fan speed. Change the settings again pushing the knob as described
above.
Attention! At the end of the manual you will find the section "Calibration
of the minimum speed"
38

Humidity hysteresis setting

Minimum speed setting

min.

Maximum speed setting

max .