Service And Repairs; Cleaning - ketrop BirdYell Bedienungsanleitung

6.
7.
8.
9.
10.
4.3

SERVICE AND REPAIRS

Service and repairs can only be performed by the manufacturer: Service and repairs can only be performed by the manufacturer:
Ketrop Ketrop
Smokstraat 2,
4891 ZK Rijsbergen (NL)
The Netherlands
Phone: 0031 (0)6-51 35 34 47
E-mail: info@ketrop.com
or by the supplier of your BirdYell-Hand.
Opening the BirdYell-Hand is not allowed.
5

CLEANING

Only clean the BirdYell-Hand by means of a damp cloth.
Remove all power supply from the BirdYell-Hand by removing all type Remove all power supply from the BirdYell-Hand by removing all type
AA batteries and/or the 12 VDC connection. AA batteries and/or the 12 VDC connection.
Now press the "SELECT" (3) button to confi rm and to have the device
produce the chosen sound.
The volume can be changed with the buttons VOL and VOL . Each
time you press one of these volume buttons, the sound is incremented or
decremented by one level.
A volume level of 20 usually yields good results.
If you want to change the type of sound, press the "SOUND" button,
followed by the "SELECT" button to confi rm.
Notice: The BirdYell-Hand keeps producing the selected sound until
you turn it off or until you operate it again.
You can change the display brightness by keeping the "DISPLAY" buttons
pressed a few seconds.
If there are no buttons pushed, approximatively 30 seconds, the screen is
disabled.The device itself however, keeps playing the selected sound.
The display is reactivated as soon as you operate the BirdYell-Hand.
8