Hardware Connections - ZyXEL P-334U Kurzanleitung

1 Hardware Connections

Do the following to make hardware connections for initial setup.
1 WAN Connection
Connect your modem to the "WAN" port using the cable that came with your modem.
2
LAN Connection
Connect your computer to a "LAN" port using the included Ethernet cable
3 POWER Connection
Use the included power adaptor to connect the POWER socket to an appropriate power source (see the User's
Guide for power adaptor specifications by region).
The LEDs
Look at the front panel LEDs. When you
connect the power, the PWR LED blinks and
stays on once the device is ready. About 30
seconds later, the A/G LED also comes on.
The LAN and WAN LEDs turn on if the
corresponding connections are properly
made.
ENGLISH
4