ZyXEL P-334U Kurzanleitung Seite 13

PPPoE Connection
A Select PPPoE as your WAN connection type.
B Type a Service Name (Optional), User Name and Password.
C Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to D.
Or
Select Use fixed IP address provided by your ISP to give the P-334U a fixed, unique IP address. Go to C1.
C1 If you select Use fixed IP address provided by your ISP, enter a WAN IP address, WAN IP Subnet Mask
and the neighboring device's IP address given by your ISP.
If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and just
click Next.
D Select Factory Default to use the factory assigned default MAC address.
E Select the check box to have the P-334U apply bandwidth management to traffic going out through the P-
334U's WAN, LAN or WLAN port according to the traffic type.
F Click Apply to save your changes. The OTIST in Progress screen appears if you enable OTIST in the
previous wizard screen. Wait for the P-334U to finish transferring OTIST settings.
ENGLISH
13