Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private/domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Stunt Scooter XQ-12, XQ-13 // Stunt Scooter XR-25
Item number: 14025/01, 14026/01 // 14027/01
Dimensions:
66 x 50 x 82,5 cm // 65,5 x 52 x 82 cm
Item weight:
approx. 3,5 kg // approx. 3,8 kg
Class:
A, 100 kg maximum user weight (valid for all models)
Purpose:
Recreational scooter for doing tricks and jumps (in the halfpipe),
not a toy.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Scooter (in two parts)
2 x Allen wrench
1 x These instructions
Other items included are meant to facilitate safe transportation and are not requi-
red for the installation and use of the product.
SAFETY INSTRUCTIONS
• Wear suitable protective clothing for your own safety. Wear personal protec-
tive equipment. This includes at least: hand/wrist guards, knee pads, head
protection and elbow pads. Never use the scooter without shoes!
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e. those which
are flat, clean, dry, and use the scooter where possible away from other
road users. Avoid sloping ground. The brakes may become hot if the
scooter has been used for a while! Your footwear could be damaged! The
brakes shouldn't be touched until they have cooled down.
• Always be considerate of others.
• Before you start. Ensure that all fasteners and locking parts are intact and
tight; the functioning of the self-locking threads can slacken after repeated
loosening and tightening of the fasteners. Check especially for the correct
alignment and fastening of the steering set-up.
• Do not use the scooter at twilight, at night or in poor visibility. Do not use it
on roads or thoroughfares or on slopes or hills. Avoid being in the proximity of
stairs and open water.
• Prior to using the scooter, please inform yourself about restricting applicable
traffic regulations for the intended area of application.
• The use of the product requires specific skills and knowledge to be able to
avoid injuries due to crashes and collisions.
• Children should only use the product when they are under adult supervision.
SET-UP INSTRUCTIONS
The stunt scooter is equipped with a compression system. Turn the hexagonal
screw at the top end of the fork until the fork and the head tube are firmly con-
nected with each other at the front end of the deck without any shaking. Loosen
the locking screws on the handlebar clamp as far as possible so that you can
slide the clamp over the end of the handlebar. Now slide the handlebar as far
as it will go onto the fork. The handlebars must be aligned in a straight manner.
Tightly screw on the locking screws of the clamp. Make sure that the handlebar
remains straight. For disassembly of the scooter, carry out the described Instal-
lation steps but however in the reverse order.
All images are examples of the design.
USAGE INSTRUCTIONS
NOTHING'S EASY AT FIRST ...
... most accidents happen to "beginners" within the first ten minutes. Particular
care should be taken during this stage.
USAGE INSTRUCTIONS
The scooter moves when a foot is used to regularly push off, just as with well-
known children's scooters. Braking is no problem either - simply step on the
friction brake over the back wheel (mudguard).
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.
hudora.de/). Store the product in a safe place where it is protected from the
elements, cannot be damaged, and cannot injure anyone.
Replace damaged or worn assembly parts in order to ensure the safety of your
scooter.
WHEEL CHANGE
Replacement wheels are available as accessories from http://www.hudora.de
and should be replaced when they are worn down. However, it is usually advisa-
ble to change the bearings when the wheels are changed. To change the wheels,
loosen the axle fitting with two Allen keys and take the wheels off the axle. A
screwdriver or Allen key can be used to push the bearings out of the wheel to use
them in the new wheel. Put the bearings into the new wheel with the bolt spacer
and mount them to the frame with the axle screws. Make sure the axle has been
screwed on tightly before starting again!
BEARINGS
Your kick scooter is equipped with precision ball bearings, which were filled with
grease under high pressure, during manufacture. For this reason, the rollers
of the kick scooter only run lightly and swiftly, while under load. Bearings are
maintenance-free, but they are wear parts. Caution! Worn bearings make cons-
picuous audible noises and their function is constrained. In order to maintain
optimal riding pleasure and to ensure lasting safety, you should replace bearings,
as soon as they begin to exhibit signs of being worn. In the case of full load and
daily use we recommend the replacement of the rollers and bearings twice a
year. Bearings are available as accessories under http://www.hudora.de/.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/service.
3/8
Werbung
