Ordering Codes; Technical Specifications - JOVENTA SAF1.08Sx/12 series Handbuch

English

Ordering Codes

S A F 1 . 08S A / 12 ON/OFF Electric Spring Return Actuators for fire damper
-
A
B
C
1 = 24 V AC/DC
2 = 230 V AC

Technical Specifications

Product Codes
Action Control
Power Requirements
- Running (AC)
- Holding Position (AC)
- Running (DC)
- Holding Position (DC)
Transformer Sizing Requirements
- Minimum per Actuator
Auxiliary Switch Rating
Spring Return
Rated Torque
- Power On (Running) 8 Nm at all operating temperatures
- Power Off (Spring Running) 8 Nm at all operating temperatures
Rotation Range
Rotation Time for 95°
- Power On (Running) 55 to 71 Seconds for 0 to 8 Nm Load, at All Operating Conditions
- Power Off (Spring Returning) 13 to 26 Seconds for 0 to 8 Nm Load, at Room Temperature
Cycles
Audible Noise Rating
- Power On (Running) <47 dBA at 8 Nm Load, at a Distance of 1 m
- Power On (Holding) <20 dBA at a Distance of 1 m
- Power Off (Spring Returning) <52 dBA at 8 Nm Load, at a Distance of 1 m
Electrical Connections
- Auxiliary Switches 1.2 m UL 758 Type AWM Halogen Free Cable with 0.85 mm² (18 AWG) conductors and 6 mm
Mechanical Connections
Enclosure Rating
Ambient Conditions
Shipping Weight
Dimensions
Conformity
= no sensors
= with ambient thermosensor
= with duct sensor
= with duct and ambient sensor
24 V AC at 50/60 Hz (AC 18 V to 30 V)
24 V DC (DC 21.6 V to 28.8 V)
Two Single-Pole, Double-Throw (SPDT), Double-Insulated Switches with Gold Flash Contacts:
AC 24 V, 50 VA Pilot Duty;
AC 240 V, 5.0 A Resistive, 1/4 hp, 275 VA Pilot Duty
Direction is Selectable with Mounting Position of Actuator:
Side A, Actuator Face Away from Damper for CCW Spring Return;
Side B, Actuator Face Away from Damper for CW Spring Return
Maximum Full Stroke: 95°
60 Seconds Nominal at Full Rated Load (0.251 rpm)
21 Seconds Nominal at Full Rated Load
39 Seconds Maximum with 8 Nm load at -20 °C
60,000 Full Stroke
- Actuator 1.2 m UL 758 Type AWM Halogen Free Cable with 0.85 mm² (18 AWG) conductors and 6 mm
ferrule ends
ferrule ends
12 mm square shaft, 10 mm and 8 mm adapter
IP 54 for all mounting orientations
- Operating -20 to 50 °C; 90% RH Maximum, Non-condensing
- Storage -40 to 60 °C; 95% RH Maximum, Non-condensing
See figure 1
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
SAF1.08Sx/12 - SAF2.08Sx/12_14-88360-2420_Rev. B_06 2010
SAF1.08Sx/12
6.1 VA
1.2 VA
3.5 W
0.5 W
7 VA
1.7 kg
This document is subject to change without notice
SAF2.08Sx/12
ON/OFF
230 V AC at 50/60 Hz (AC 198 to 264 V)
0.04 A
0.03 A
1.9 kg
---
---
---
2