Bahco BCL32IW1 Betriebsanleitung Seite 8

The LED Light on the Charger
Battery Pack LED Indication Function (Optional)
status. The fuel gauge green LED will indicate when the "SW" button is momentarily pressed.
Remaining Capacity LED Indication
WARNING
2. If the battery pack is too hot or too cold, the charger will not fast charge the battery pack
3. If both red and green indicator lights are "ON" the battery pack either does not comply or is
defective. Please contact your retailer.
4. Do not charge the battery pack in the rain, snow or high temperature environment.
the room for one hour to warm up before starting the battery pack.
8. The charger should be cooled at least one hour after continue charging three times.
9. Do not use generator for charging the battery pack.
5. Your new battery pack is not charged. You need to charge it before
use.
battery pack is inserted into the charger correctly, the red light will
come on and charging will begin.
been used for a long period, it may not accept a full charge. This is a
normal condition and does not indicate a problem. You can recharge
the battery pack fully after discharging it completely a couple of times.
9. Please remove the battery from the unplugged charger for storage.
RC Status
• •
8