Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
The DVM830L is a compact pocket-sized multimeter with a 3 1/2 digit LCD for measuring AC and DC voltages, DC
currents, resistance, transistors and diodes. Full overload protection is provided. It is the ideal instrument for
hobbyists, for use in the field, for laboratories and workshops and for domestic applications.
1.1. Warning
Treat this device with the utmost caution as improper use may result in injury or death. In addition to normal safety
precautions for dealing with electrical circuits, the user should also follow the safety precautions suggested in this
manual to the letter. Do not use this device if you are unfamiliar with electrical circuits and testing procedures.
This device is not designed for commercial or industrial use.
1.2. Safety Precautions
This multimeter is designed to ensure the safest operation possible. Nevertheless, safe operation depends on you,
the operator. Follow these simple safety rules:
• Never apply a voltage to the multimeter that exceeds 1000VDC or 700VAC rms between an input jack and
ground.
• Use extreme caution when working with voltages above 60VDC or 30VAC rms.
• Always discharge the filter capacitors in the power supply circuit under test before attaching the test leads.
• Never connect a voltage source to the DVM830L when the device is in the DCA, ACA, resistance continuity
mode.
• Always turn off the power and disconnect the test leads before replacing the battery or fuse.
• Never operate the multimeter unless the battery cover is in place and fully closed.
When carrying out measurements on TV's or switching power circuits, always remember that there may be high
amplitude voltage pulses at test points which may damage the meter.
1.3. Maintenance
Your DVM830L is the result of superior design and craftsmanship. The following suggestions will help you keep your
multimeter in perfect working order:
• Keep the multimeter dry. Wipe it immediately if it gets wet.
• Use and store the multimeter under normal temperatures. Extreme temperatures may shorten the life of the
device or damage the battery.
DVM830L
DVM830L – MINI DIGITAL MULTIMETER
1
VELLEMAN

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Velleman components DVM830L

  • Seite 18: Wartung

    Falls Zweifel bestehen, wenden Sie sich für Entsorgungsrichtlinien an Ihre örtliche Behörde. Das DVM830L ist ein kompaktes Multimeter mit 3 ½ stelliger LCD-Anzeige. Mit diesem Gerät können Sie nicht nur AC- und DC-Spannung, DC-Strom und Widerstand messen, sondern auch Dioden- und Transistortests durchführen.
  • Seite 19 1) Messen Sie keine Spannungen die das Erdungsniveau über 500V überschreiten. So vermeiden Sie die Zerstörung ihres Messgerätes, wodurch Sie gefährdet werden können. 2) Überprüfen Sie VOR jedem Gebrauch des Multimeters die Isolation aller Messleitungen, Prüfspitzen und Connectoren. DVM830L VELLEMAN...
  • Seite 20 2) Überprüfen Sie um welchen Typ Transistors es sich handelt (NPN of PNP) und lokalisieren Sie die Basis, den Emitter und den Kollektor. Stecken Sie die Leitungen in die entsprechenden Öffnungen des Transistorsockels auf der Frontplatte. 3) Auf dem Display erscheint nun der gemessene hFE-Wert. Testverhältnisse : Basisstrom 10µ A, Vce 2.8V. DVM830L VELLEMAN...
  • Seite 21: Technische Daten

    Bereich. 4.3. AC-Spannung Bereich Auflösung Genauigkeit 200V 100mV ±1.2% ± 10 Digits 750V ±1.2% ± 10 Digits Überlastungsschutz : 1000VDC oder 750Vrms für jeden Bereich. Respons : durchschnittlich, Kalibrierung in rms der Sinuswelle. Frequenzbereich : 45Hz - 450Hz DVM830L VELLEMAN...
  • Seite 22 1Ω 20kΩ 10Ω 200kΩ 100Ω ± 1.0% ± 2 Digits 2000kΩ 1kΩ Max. Spannung für offenen Stromkreis : 2.8V Überlastungsschutz : max. 220Vrms während 15 Sek. für jeden Bereich. 5. Zubehör Bedienungsanleitung Set Messleitungen 9V-Batterie Alle Änderungen vorbehalten. DVM830L VELLEMAN...

Inhaltsverzeichnis