Herunterladen Diese Seite drucken

Cleaning And Maintenance - Lentz CM9105CA-GS Bedienungsanleitung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

the coffee will overflow the
funnel.
7. Upon completion of brewing coffee,
that is one minute later after the coffee
stops dripping out, you can remove the
carafe, pour and serve.
NOTE: the brewed
coffee you get will be slightly
less than the water you have
added as some water is
absorbed by coffee powder.
DO NOT touch cover,
warming plate and so on
when operating as they are
very hot.
8. When the process is finished, if you do
not want to serve immediately, keep the
switch on, the coffee can be kept warm
in the warming plate for 40 minutes and
the appliance will be cut off automat-
ically after 40 minutes. For an optimum
coffee taste, serve it just after brewing.
9. Always turn the coffee maker off and
disconnect the power supply after use.
NOTE: Be careful when
pouring the coffee out,
otherwise you would be hurt
as the temperature of coffee
just finished is high.
CLEANING AND MAINTE-
NANCE
CAUTION: Always
unplug the product from
electrical outlet and allow
12
EN
Bedienungsanleitung_74174_DE_EN_300719.indd 12
the warming plate to cool
completely before cleaning
it. Never immerse the unit or
power cord into water or any
other liquid for cleaning.
1. Clean all detachable parts after each
use in hot, sudsy water.
2. Wipe the product's exterior surface
with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the
area above the funnel and drip onto the
product base during brewing. To control
the dripping, wipe off the area with a
clean, dry cloth after each use of the
product.
4. Use a damp cloth to gently wipe
the warming plate. Never use abrasive
cleaner to clean it.
5. Replace all parts and keep for next
use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating
efficiently, periodically you should clean
away the mineral deposits left by the
water according to the water quality in
your area and the use frequency. We
recommend decalcifying your coffee
maker as follows, using a solution of white
vinegar and cold water. A solution of two
tablespoons (30ml) white vinegar in one
carafe of cold water works best.
1. Fill the tank with the vinegar solution to
the maximum level as indicated on water
gauge.
30.07.19 18:17

Werbung

loading