Walmag BUX NEO 150 Bedienungsanleitung Seite 6

EN
PERMANENT LIFTING MAGNETS Type NEOLIFT 150, NEOLIFT 300, NEOLIFT 600, NEOLIFT 1000,
NEOLIFT 1500, NEOLIFT 2000, NEOHOT 250, NEOHOT 500, NEOHOT 1000 and NEOHOT 2000
OPERATING AND MAINTENANCE INSTRUCTIONS FOR MODELS NEOLIFT 300, NEOLIFT 600, NEOLIFT 1000,
NEOLIFT 1500 A NEOLIFT 2000, NEOHOT 250, NEOHOT 500, NEOHOT 1000, NEOHOT 2000
FOREWORD
You have purchased a WALMAG MAGNETICS lifting magnet.
We thank you for the trust you have placed in our product.
These instructions contain all the information required for safe
and optimum use of the lifting magnet. Read the instructions
carefully and follow the directions. Keep the instructions in a
safe place close to the workplace.
On delivery check that the magnet is undamaged and
complete. If the equipment is damaged or incomplete contact
your supplier immediately.
The complete delivery consists of:
● Magnet NEOLIFT 150, NEOLIFT 300, NEOLIFT 600, NEOLIFT
1000, NEOLIFT 1500, NEOLIFT 2000, NEOHOT 250,
NEOHOT 500, NEOHOT 1000, NEOHOT 2000
●
Operating and maintenance instructions NEOLIFT 150,
●
NEOLIFT 300, NEOLIFT 600, NEOLIFT 1000, NEOLIFT 1500,
NEOLIFT 2000, NEOHOT 250, NEOHOT 500, NEOHOT
1000, NEOHOT 2000 incl. EC Declaration of Conformity
NEVER USE A DAMAGED OR INCOMPLETE
MAGNET!
The NEOLIFT 150, NEOLIFT 300, NEOLIFT 600, NEOLIFT 1000,
NEOLIFT 1500, NEOLIFT 2000, NEOHOT 250, NEOHOT 500,
NEOHOT 1000, NEOHOT 2000, are guaranteed for a term
of 60 months on the magnetic system. The guarantee is not
applicable to shortcomings that can be wholly or partially
attributed to:
● failure to comply with the operating and maintenance
instructions or use considered as being other than normal.
● normal wear.
●
MAGNETICS or an authorised agent.
In all correspondence regarding your lifting magnet always
state the information displayed on the type plate.
We herewith declare that the lifting magnets NEOLIFT 300, NEOLIFT 600, NEOLIFT 1000, NEOLIFT 1500, NEOLIFT
2000, NEOHOT 125, NEOHOT 250, NEOHOT 500, NEOHOT 1000, NEOHOT 2000 are in conformity with the provisions
of the Machinery Directive (Directive 2006/42 EG as amended), with the harmonised standards EN 13155 and with
national implementing legislation.
NAMES OF THE MOST IMPORTANT PARTS OF THE
LIFTING MAGNET
1. Magnet
2. Instruction plate + type plate
3. Lifting eye
4. Handle
5. Handle lock plate
6. Pole shoes
2
1
TECHNICAL SPECIFICATIONS AND DIMENSIONS
typ
150 300
93 152
Lenght (mm)
60 100
Width (mm)
Height (mm) (incl.
120 180
Lifting eye)
Weight (kg) 3 10
Tested Lifting
470 1000
Capacly (kg)
Workload limit for
150 300
plates (kg)
Workload limit pipe
65 150
and tube (kg)
Ø min/max (mm) 40/100 60/200 65/270 100/300 150/350 150/350
FOR VERTICAL MANIPULATION CAPACITY
CCA 20% OF NOMINAL ONLY! DO THE TEST
BEFORE VERTICAL MANIPULATION!
Zbyněk Tihelka
Director for strategic sales
1
3
4
5
6
NEOLIFT
600 1000 1500 2000
246 306 374 478
120 146 165 165
180 236 273 273
21 40 69 90
1900 3200 4700 6200
600 1000 1500 2000
300 500 750 1000