Function Settings - Asus Q10364 Kurzanleitung

Function settings

FUNCTION
Resolution
Auto Record
Voice Record
G-sensor sensitivity
GPS status
Time/Date
Date Stamp
Loop Playing
Monitor Mode
12
DESCRIPTION
1080P_HDR/30FPS , 1080P/30FPS , 720P/60FPS, 720P/30FPS
Automatically starts recording when you start your vehicle.
Turns the microphone on/off.
Sensitivity High/Mid/Low/Off: This function allows you to
set the collision intensity level that triggers an emergency
recording. Once the specified intensity level is reached, your
car camcorder automatically records the emergency event
and saved it to the EmgRec folder. You can save up to ten
(10) emergency recording files that normal recording cannot
overwrite.
Indicates the GPS signal status. An external GPS sensor is
attached�
Sets the date and time setting�
Sets the date and time that the video is taken�
Turns the loop playback on/off.
When the scene does not change in 60 seconds, your car
camcorder automatically goes into power saving mode and
begins recording at 1fps. When the scene changes, recording
resumes at 30fps and is saved as a new file. When this function
is enabled, manual emergency recording is disabled. Available
options: Off / On