Blade iBLADE SAWCONTROL Bedienungsanleitung Seite 19

SAWCONTROL 800V3 - S.A.M 3.0
Reporting
All measuring data can
be saved in various for-
mats. For the standard
report, all information is
summarized and marked
with a „good" or „bad"
sign. All scans can be sa-
ved in the data base, can
be exported or simply be
saved as PDF.
Dashboard - Quickcheck
After completing measurement with tolerance indications, all necessary data, e.g. circular
run-out, axial run-out and measuring parameters can be identifi ed via colored diagrams.
For a detailed analysis, each tooth can be closely regarded on each of the four pictures for
a better individual evaluation.
your link to Industry 4.0
19
SawControl 2019-02