CARDIN ELETTRONIC SSB Serie Bedienungsanleitung Seite 21

Procedure 1: memorisation using the "MEMO" key
1) Type a user code into the keyboard:
the keyboard is ready to transmit (green LED lit)
2) Press and hold down the MEMO button on the receiver:
the red LED in the receiver will flash
3) Activate the channel to be memorised (A, B, C, D):
in the keyboard. The green LED will flash
4) Keep the MEMO button pressed down on the receiver,
until the red LED on the receiver starts to flash
5) Release the MEMO button:
the red LED on the receiver keeps flashing
6) Activate the same channel on the receiver a second time (if the channel is
different the memorisation procedure will quit without memorising the keyboard)
7) End of the memorising procedure: the red LED on the receiver remains lit
for 2 seconds indicating that the keyboard has been memorised correctly.
21
ON
3
A
3
B
2
6 ON
1 C
5
9
D
4
8
3
A
3
B
2
6
1 C
5
9 D
4
8
A
A