Sage the Smart Oven BOV860 Kurzanleitung Seite 13

REPLACING THE OVEN LIGHT
WARNING
Always unplug oven and let cool before replacing
bulb. Only use a 25-Watt, 220-240V, G9 type
oven bulb.
1. Remove the wire rack from the oven before
replacing the light.
2. The light is positioned on the lefthand side of
the oven cavity. Position your fingers on the
outside of the light housing and gently pull the
glass cover away from the oven wall to remove
it. If you are unable to pull the cover off, slide a
spoon into the left side of the light housing and
gently lever the glass cover off. Always hold the
glass cover with the other hand to prevent the
cover from falling and breaking.
3. Remove the used bulb by pulling it directly
out of its holder.
4. Use a soft cloth to insert the new bulb.
Do not directly touch the surface of the bulb
with your fingers as oil from your skin can
damage the bulb.
5. To reattach the glass cover, align the metal
hook with the left side of the light housing. Slide
the opposite end of the glass cover into the
metal bracket on the right side of the housing,
then push the metal hook into the left side of the
housing until it snaps securely into position.
NOTE
The top of the oven is very hot during and after
operation. As a result, storing items on top of the
oven is not recommended.
The only exception is the optional Sage Bamboo
Cutting Board and Serving Tray that fits in the
ribbed section on top of the oven. Visit
www.sageappliances.com for more information.
EN
13