Operation; Switching The Monitor On/Off; B) Remote Control; Inserting/Changing The Remote Control Battery - Sygonix 2100156 Bedienungsanleitung

10.

Operation

a) Switching the monitor on/off
• Press the on/off button (7) on the monitor or remote control (G). The LED indicator (1) will switch to blue.

b) Remote control

G
F
E
D
C
B
A
c) Inserting/changing the remote control battery
• Before first use, insert the CR2025 battery (included) into the remote control. Follow the steps below to insert the
battery:
• Push open the lever on the battery compartment and remove the battery compartment from the remote control.
• Insert a new CR2025 button cell into the battery compartment. The positive terminal should point upwards (see
"+" symbol on the battery).
• Place the battery holder back into the remote control and make sure that the lever snaps into place.
Replace the battery if the range decreases or if the product no longer responds to the remote control.
• To replace the battery, follow the steps above. Remove the used battery before inserting a new battery.
22
A Down arrow button
B MENU button
H
C Left arrow button
I
D Up arrow button
E FREEZE button
F PICTURE button
J
G On/off button
H Mute button
I INPUT button
J Right arrow button