Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the gas bottle
1 = Main tap
2 = Pressure regulator
3 = Gas hose
4 = Gas Bottle
5 = Rubber washer
Instructions for use
Ignition:
EN
1. Push down the control knob.
2. While pressing, turn the control knob to the igni-
tion position (lightning).
3. While knob is in this position press the ignition
button several times
If the flame fails to remains lit, repeat the procedure, keeping the control knob pressed in for a few extra
seconds.
12
1
4
Attach the pressure regulator to the gas bottle
using the large brass nut. Always ensure that the
rubber-sealing washer is present in the nut. (NB.
This rubber washer is not required for UK-type
pressure regulators). Tighten the nut well. Note
that the nut has a left-hand thread.
Check the connections for leaks using a soap and
water solution.
Every time a newly filled gas bottle is connected, a
new rubber washer must be fitted. In most cases,
your gas supplier will include it with the bottle.
2
5
4. Keep the control knob pressed for 10-15 seconds
5. Move the control knob to the desired setting be-
tween
and
.
3
Werbung
Inhaltsverzeichnis
