Maintenance And Cleaning; A - Cleaning The Machine; B - Emptying And Cleaning The Water Tank (Optional); C - Replacing The Brush - Wirbel C 143 L08 Gebrauch Und Wartung

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
7.1 MAINTENANCE AND
CLEANING
WARNING:
For information and warnings relating
to maintenance or cleaning, follow what
is described in the "Safety warnings for
single disc" manual, accompanying this
document.
OPERATIONS TO BE
CARRIED OUT EVERY DAY

7.1.a - Cleaning the machine

Clean the machine with a damp cloth and
then wipe it with a clean, dry cloth to prevent
the formation of scale due to the effect of
chemicals.
WARNING:
Do not use solvents, acids or corrosive
substances for cleaning the machine.
7.1.b - Emptying and cleaning the
water tank (optional)
WARNING:
Once you have finished washing, you
must drain and clean the water tank to
prevent deposits or scale.
To empty the water tank, release it from its
supports.
WARNING:
Store the appliance in a dry, sheltered
place.
OPERATIONS TO BE
CARRIED OUT AS
REQUIRED

7.1.c - Replacing the brush

It becomes necessary to replace the brush
due to wear when the bristles are less than
2 cm long or if it needs to be changed due
to the type of floor to be washed. Refer to
the "Assembling the brush" paragraph for in-
structions.

7.1.d - Replacing the pad holder

It becomes necessary to replace the pad
holder due to wear when it is less than 10
mm high, or if it needs to be changed due
to the type of floor to be polished or sanded.
Refer to the "Assembling the pad holder"
paragraph for instructions.
ENGLISH - 7