Werbung
Verfügbare Sprachen
Verfügbare Sprachen
danneggiati deve essere eseguita esclusivamente da personale
autorizzato.
Dati tecnici
Prodotto
Seggiolino da bicicletta per bambini
OKBABY mod. 10+
Dimensioni
41x58x70 CM (LxPxH)
Peso
3,7Kg
Accessori optional
• Blocco di fissaggio n. 37425210
Il braccio di supporto non è corredato al blocco di fissaggio.
Diametro tubo canotto da 28 a 40 mm
• Braccio di supporto:
n. 37430000
n. 37430200
telai bici
telai bici con
standard
inclinazione
posteriore
Conformità e produttore
Prodotto in conformità con la Normativa Europea EN14344.
Produttore:
OKBABY srl, Via del Lavoro 26, 24060 Telgate (BG) Italy.
+39 035 830004 - okbaby@okbaby.it - www.okbaby.it
6
Seggiolino posteriore 10+
n. 37430100
n. 37430700
telai bici con
telai bici piccoli
inclinazione
per bici da
anteriore
donna
Rear mounted child's bicycle seat
EN
OKBABY 10 +
Read the instructions and keep them for future reference.
Follow and comply with the safety precautions!
Make sure you know how to mount and use the 10+ child's seat
before using it.
Product description
10+ is a rear seat that is mounted on the bicycle frame steering col-
umn tube with a round section diameter of between 28 and 40mm.
10+ is designed to carry children who are at least about 9 months
old, weighing minimum 15 kg, and up to a maximum of 22kg. The
child must be able to sit independently, at least for the duration of
the ride. 10+ can also be mounted on electric bicycles. It must not
be mounted on any other two-wheeled vehicles such as scooters,
mopeds, motor-cycles, etc.
Product overview
1
Seat
2
Padding
3
Safety belts
4
Footrest with relative strap and regulating pin
5
Support arm with guide plate
6
Reflector
7
Fastening counter-block
8
Fastening block
9
Bag for accessories containing 4 M6x70 screws,
4 M6x80 screws and an Allen wrench.
10
Locking pin
11
3 plastic adaptors for use on various frame diameters
12
1 soft plastic reducer seat
13
Fastening counter-block protection cover
14
Fastening block front cover
Important safety information
1)
The seat must be mounted behind the rider, on the frame's
steering column tube, as shown in the instructions in this
manual. Do not tighten the screws excessively and check the
tightness periodically.
2)
Check that the bicycle is suitable for adding supplementary
loads. Check the information supplied with the bicycle or ask for
Rear child's seat 10 +
7
Werbung
