Sony BKM-FW50 Bedienungsanleitung Seite 51

Mail Account
Mail Address:
Enter the allocated mail address here.
The maximum length for the address is
64 characters.
Outgoing Mail Server (SMTP):
Enter the mail server address here.
The maximum length for the address is
64 characters.
Requires the use of POP
Authentication before Send e-mail
(POP before SMTP):
If POP authentication is required when
connecting to the SMTP server, select
this check box.
Ingoing Mail Server (POP3):
When POP authentication is used for
the "POP before SMTP" setting, enter
the POP3 server address here.
Account Name:
Enter the mail account name here.
Password:
Enter the mail password here.
Send Test Mail:
To test whether mail can be sent
successfully to the specified
address(es), select this check box and
click "Apply". A test mail will be sent.
Note
If any of the following items is not set or
not set correctly, an error message appears,
and test mail cannot be sent:
• Target address
• Mail account address and mail server
address (SMTP)
Advanced
Gives access to advanced settings to enable
use of various applications on the network.
Make the settings as required by the
respective application.
Advertisement
Lets you make settings for the
Advertisement and Broadcast functions on
the network.
ID Talk
Lets you make settings for the ID Talk
function. ID Talk is a protocol that allows
network-based control of the display in
which the BKM-FW50 is installed.
Controlled items includes various settings
and adjustments such as color temperature
and gamma. For information about
supported ID Talk commands, contact your
local Sony dealer.
SNMP
The BKM-FW50 is a network device which
supports SNMP (Simple Network
Management Protocol). Besides standard
MIB-II, Sony Enterprise MIB is also
supported. This screen allows making
settings for SNMP.
For information about supported SNMP
commands, contact your local Sony dealer.
Returning to default settings
To reset all settings made on the Setup
screen to the factory default condition, use
a thin pointed object to press and hold the
RESET button on the front panel of the unit
(page 5) for at least 3 seconds.
Computer Operation
21