Installation - Samsung SIA-0100Q Benutzerhandbuch

Receiver
Power 12V DC
Environment Out
•
Alarm Out: The sensor will operate in both N.C and N.O mode
•
Environment Out: This output triggers if normal operation is disabled due to an environmental phenomenon such as fog.
•
LED Out: Turns on the indicator in 5 levels according to the setting. The signal sound will be set in 3 levels by turning on the
DIP switch #3. Once adjusted, you should turn off the DIP switch.

Installation

To attach to the pole
Attach the ㄷ-shaped bracket to the main bracket.
1.
Fix the ㄷ-shaped bracket by using screws (4x6).

The ㄷ-shaped bracket accepts any Φ38~Φ43 poles.
2. Insert the U-shaped bracket and insert the sensor bracket.
Insert the U-shaped bracket to the pole and use the screws (4x25) to fi x the
inserted sensor bracket.
Z6806119901A-SIA-0100Q,0200Q.ind6 6 Z6806119901A-SIA-0100Q,0200Q.ind6 6
(nonpolar)
Alarm Out
Tamper
Tamper Switch
English _6
Status Indicators (Memory/Alarm/Environment)
Strength in 5 Levels
Response Time Adjustable Button
Channel Setting (1,2)
Signal Sound Setting (3)
Alarm Memory Setting (4)
Level LED On/Off
Pole Diameter
38mm ~ 43mm
2010-06-09 오후 2:04:44 2010-06-09 오후 2:04:44