Hanwha Techwin SBP-300NB Benutzerhandbuch Seite 25

9. Pull the cable out through the door and wall mount and mount the door on the housing.
(Return the locking lever to its original position and check that the hinge is properly attached to the
housing.)
HOUSING
10. Fasten the door to the housing using a hexagonal wrench. (Tighten the screws while pressing the
door with your hand as shown in the image below. Then tighten each of the screws a little at a
time to make sure that the door is tightly pressed to the housing.)
LOCKING LEVER
Wall Mount
Cable
DOOR
LOCKING LEVER
English _11