Velleman projects VMB2BL Bedienungsanleitung Seite 3

Relay contacts for blind motor 1 control
1
Relay contacts for blind motor 2 control
2
3 12V supply
4 Velbus
5 Direct push button control blind 1 DOWN
6 Direct push button control blind 1 UP
7 Direct push button control blind 2 DOWN
8 Direct push button control blind 2 UP
9 Address setting
Enter a unique address (except for '81', '91', 'A1', 'B1',
'C1', 'D1', 'E1', 'F1', 'C2', 'D2', 'E2' and 'F2') for each
module.
Power LED
10
11 Reception LED
Fowarding LED
12
Termination
13
If the module is connected as the final device on the VEL-
BUS, place the 'TERM' jumper. Remove the jumper in all
other cases.
See also connection examples on page 22 & 23!
14 DOWN operation mode LED blind 1
15 UP operation mode LED blind 1
16 DOWN operation mode LED blind 2
UP operation mode LED blind 2
17
Indication LED DOWN blind 1
18
19 Indication LED UP blind 1
20 Indication LED DOWN blind 2
21 Indication LED UP blind 2
22 Manual UP control blind 2
23 Manual DOWN control blind 2
24 Manual UP control blind 1
Manual DOWN control blind 1
25
Switch-off delay setting
26
ENGLISH
3